Dragracer A, B (Alchemy, Augury)

Dragracer [Millenium Space]

Dragracer is mission to demostrate electrodynamic deorbiting of satellites to show, that a small satellite with a deployable tether can safely deorbit in a matter of weeks.

The Dragracer project is a joint project to test Tethers Unlimited's Terminator Tape, a conductive tape designed to produce enough drag to lower the satellite's orbit. Millenium Space provides the bus, integration is provided by TriSept and launch by Rocket Lab.

The mission consists of two basically identical satellites 6U (2×2×1.5U) CubeSats of a joint weight of 25 kg. The satellite with the terminator tape is called Alchemy, while the reference satellite is called Augury. After deployment, the two spacecraft split up and one deploys the 70 m Terminator tether, while the other one decays naturally to provide a direct comparisson. It is expected, that the satellite with Terminator Tape will reenter after about two to four weeks, while the other will remain about eight months in orbit. Millennium will use radar to track the satellites and collect data.

Dragracer was launched in November 2020 on a rideshare mission on an Electron KS (R) rocket into a 400 km sun-synchronous orbit.

Nation: USA
Type / Application: Technology
Operator: TriSept Corp.
Contractors: Millenium Space (bus); Tethers Unlimited (payload)
Equipment: Terminator Tape deorbiting device
Configuration: CubeSat (6U (2×2×1.5U)) (Raptor class bus)
Propulsion: -
Power:
Lifetime:
Mass: 12.5 kg
Orbit: 400 km, SSO
Satellite COSPAR Date LS Launch Vehicle Remarks
Dragracer A (Alchemy) 2020-085AB 20.11.2020 OnS LC-1A Electron KS (R) with Dragracer B, BRO 2, BRO 3, Mandrake 1, SpaceBEE 22, ..., 39, SpaceBEENZ 1, ..., 6, APSS 1, Gnome Chompski
Dragracer B (Augury) 2020-085AC 20.11.2020 OnS LC-1A Electron KS (R) with Dragracer A, BRO 2, BRO 3, Mandrake 1, SpaceBEE 22, ..., 39, SpaceBEENZ 1, ..., 6, APSS 1, Gnome Chompski

Launch Sites:

  • OnS =   Onenui Station, Mahia, Wairoa, North Island, New Zealand   New Zealand

Cite this page: