【算法-动态规划】打家劫舍专题

【动态规划】打家劫舍 阅读详情


在这里插入图片描述

1.打家劫舍

198. 打家劫舍 - 力扣(LeetCode)

1.1一维数组

class Solution
{
public:
    int rob(vector<int> &nums)
    {
        int n = nums.size();
        if (n == 0)
            return 0;

        // 房子编号0~n-1
        // dp[k] 从0偷到k获得的最大金额
        vector<int> dp(n, 0);
        dp[0] = nums[0];
        if (n == 1)
            return dp[0];

        dp[1] = max(nums[0], nums[1]);
        if (n == 2)
            return dp[1];

        for (int k = 2; k <= n - 1; k++)
        {
            dp[k] = max(dp[k - 1], nums[k] + dp[k - 2]);
        }
        return dp[n - 1];
    }
};

1.2三变量法

class Solution
{
public:
    int rob(vector<int> &nums)
    {
        int n = nums.size();
        if (n == 0)
            return 0;

        int prv = nums[0]; // dp[0]
        if (n == 1)
            return prv;

        int cur = max(nums[0], nums[1]); // dp[1]
        if (n == 2)
            return cur;
        // 房子编号0~n-1
        // dp[k] 从0偷到k获得的最大金额
        for (int i = 2; i < n; i++)
        {
            // dp[k] = max(dp[k - 1], nums[k] + dp[k - 2]);
            int tmp = max(cur, nums[i] + prv);
            prv = cur;
            cur = tmp;
        }

        return cur;
    }
};

1.3双数组法

class Solution
{
public:
    int massage(vector<int> &nums)
    {
        int n = nums.size();
        if (n == 0)
            return 0;
        // f[i] 走到i时 偷nums[i]
        // g[i] 走到i时 不偷nums[i]
        vector<int> f(n);
        vector<int> g(n); // auto g = f;
        f[0] = nums[0];
        for (int i = 1; i < n; i++)
        {
            f[i] = nums[i] + g[i - 1];
            g[i] = max(f[i - 1], g[i - 1]);
        }
        return max(f[n - 1], g[n - 1]);
    }
};

2.打家劫舍2

打家劫舍2

2.1双数组法

class Solution {
public:
    int rob(vector<int>& nums) {
        int n = nums.size();

        return max(nums[0] + rob1(nums, 2, n - 2), rob1(nums, 1, n - 1));
    }
    int rob1(vector<int>& nums, int left, int right) {
        if (left > right)
            return 0;

        int n = nums.size();
        vector<int> f(n);
        auto g = f;
        f[left] = nums[left];
        for (int i = left + 1; i <= right; i++) {
            f[i] = g[i - 1] + nums[i];
            g[i] = max(f[i - 1], g[i - 1]);
        }
        return max(f[right], g[right]);
    }
};

2.2 三变量法

class Solution
{
public:
    int robRange(vector<int> &nums, int start, int end)
    {
        int n = end - start + 1;
        if (n == 0)
            return 0;

        int prv = nums[start]; // dp[k-2]
        if (n == 1)
            return prv;

        int cur = max(nums[start], nums[start + 1]); // dp[k-1]
        if (n == 2)
            return cur;

        for (int i = start + 2; i <= end; i++)
        {
            // dp[k] = max(dp[k - 1], nums[k - 1] + dp[k - 2]);
            int tmp = max(cur, nums[i] + prv);
            prv = cur;
            cur = tmp;
        }
        return cur;
    }

    int rob(vector<int> &nums)
    {
        int n = nums.size();
        if (n == 1)
            return nums[0];
        else if (n == 2)
            return max(nums[0], nums[1]);
        else if (n == 3)
            return max(max(nums[0], nums[1]), nums[2]);
            
        // 偷nums[0]不能偷nums[1]和nums[n-1] 能偷[2, n - 2]
        // 不偷nums[0] 能偷[1, n - 1]
        return max(nums[0] + robRange(nums, 2, n - 2), robRange(nums, 1, n - 1));
    }
};

3.打家劫舍3

3.1动态规划

class Solution
{
public:
    unordered_map<TreeNode *, int> is, no;

    void dfs(TreeNode *node)
    {
        if (node == nullptr)
            return;
        dfs(node->left);
        dfs(node->right);
        is[node] = node->val + no[node->left] + no[node->right];
        no[node] = max(is[node->left], no[node->left]) + max(is[node->right], no[node->right]);
    }

    int rob(TreeNode *root)
    {
        dfs(root);
        return max(is[root], no[root]);
    }
};

3.2双变量法

struct SubtreeStatus
{
    int is;
    int no;
};

class Solution
{
public:
    SubtreeStatus dfs(TreeNode *node)
    {
        if (node == nullptr)
            return {0, 0};

        auto left = dfs(node->left);
        auto right = dfs(node->right);
        int selected = node->val + left.no + right.no;
        int notSelected = max(left.is, left.no) + max(right.is, right.no);
        return {selected, notSelected};
    }

    int rob(TreeNode *root)
    {
        auto rootStatus = dfs(root);
        return max(rootStatus.is, rootStatus.no);
    }
};

4.删除相邻数字的最大分数

删除相邻数字的最大分数_牛客题霸_牛客网 (nowcoder.com)

在这里插入图片描述

  1. 一个数组选了x可以得x分 但是值为x-1和x+1的数将会消失 直到数字全被消失或选择 问最高分数
  2. 遍历数组arr 填充hash arr中的per在hash中作下标 表示 【谁 出现的总和】如4在arr中出现了2次 则hash[4]=8
  3. 由此问题转变为 在hash中 我“偷”了某个下标i 获得了hash[i]分数 与i相邻的就不能偷了

4.1双状态数组

#include <iostream>
#include <vector>
using namespace std;

int main()
{
    const int N = 1e4 + 10;
    int hash[N] = {0};

    int n = 0;
    cin >> n;

    int per = 0;
    int end = 0;

    for (int i = 0; i < n; i++)
    {
        cin >> per;
        end = per > end ? per : end;
        hash[per] += per;
    }
    
    vector<int> f(end + 1, 0);
    vector<int> g(end + 1, 0);

    for (int i = 1; i <= end; i++)
    {
        f[i] = g[i - 1] + hash[i];
        g[i] = max(f[i - 1], g[i - 1]);
    }
    cout << max(f[end], g[end]) << endl;
    return 0;
}

4.2一维数组

#include <iostream>
#include <vector>
using namespace std;

int main()
{
    int n = 0;
    cin >> n;

    int per = 0;
    int end = 0;

    const int N = 1e4 + 10;
    int hash[N] = {0};
    
    for (int i = 0; i < n; i++)
    {
        cin >> per;
        end = per > end ? per : end;
        hash[per] += per;
    }

    vector<int> dp(end + 1, 0);

    // 房子编号0~n-1
    // dp[k] 从0偷到k获得的最大金额
    dp[0] = hash[0];
    dp[1] = max(hash[0], hash[1]);
    for (int k = 2; k <= end; k++)
    {
        dp[k] = max(dp[k - 1], hash[k] + dp[k - 2]);
    }

    cout << dp[end] << endl;
    return 0;
}

4.3三变量法

#include <iostream>
#include <vector>
using namespace std;

int main()
{
    const int N = 1e4 + 10;
    int hash[N] = {0};

    int n = 0;
    cin >> n;

    int per = 0;
    int end = 0;

    for (int i = 0; i < n; i++)
    {
        cin >> per;
        end = per > end ? per : end;
        hash[per] += per;
    }

    // 房子编号0~n-1
    // dp[k] 从0偷到k获得的最大金额
    int prv = hash[0];               // dp[0]
    int cur = max(hash[0], hash[1]); // dp[1]
    for (int i = 2; i <= end; i++)
    {
        // dp[k] = max(dp[k - 1], hash[k] + dp[k - 2]);
        int tmp = max(cur, hash[i] + prv);
        prv = cur;
        cur = tmp;
    }
    cout << cur << endl;
    return 0;
}
打家劫舍算法:动态规划思路与实现解析 我们定义dp[i]表示偷窃到第i个房屋时,能得到的最高金额。这样就把原问题拆解成了一个个子问题,通过求解子问题的最优解来得到原问题的最优解。时间效率高:借助动态规划,将时间复杂度控制在OnO(n)On,线性的时间复杂度对于处理规模不大的数组非常高效,即使房屋数量达到上限 100 ,计算也能瞬间完成。逻辑清晰易扩展。 阅读详情

相关推荐

【算法】解决动态规划问题的通用步骤思路及示例算法:打家劫舍【动态规划】

动态规划(Dynamic Programming,简称DP)是一种解决问题的算法设计技术,通常用于优化问题。它通过将问题分解为更小的子问题,并解决这些子问题,然后合并它们的解决方案来解决原始问题。动态规划通常用于具有重叠子问题和最优子结构性质的问题。 动态规划的主要思想是避免重复计算,通过将中间结果存储起来,以便后续直接使用,从而提高效率。这种思想在递归过程中特别有用,因为递归经常会重复计算相同的子问题。

yh4494的博客 1733

算法Day34|动态规划专题六 198.打家劫舍,213.打家劫舍II,337.打家劫舍 III

算法Day34|动态规划专题六 198.打家劫舍,213.打家劫舍II,337.打家劫舍 III,121. 买卖股票的最佳时机

Road_slow的博客 171

一种解决STM32多串口同时收发的方法

在做项目中,遇到了同时调用串口通信时程序崩溃的问题,在项目中,串口1用作调试串口,串口2用作MQTT通信串口,串口3用作下位机通信串口, 串口1重定向以后,用库函数自带的printf函数打印字符串 串口2使用自己写的u2_printf函数,即va_list这套变参宏定义后使用vsprintf函数打印字符串 串口3刚开始使用串口2一样的打印方式,程序在调试调用到串口3打印函数时直接崩溃,后续将串口3改用dma转存输出,仍然无法正常调用 多次研究以后,采用三个串口都使用重定向后的库函数自带的printf

Zxp0605的博客 8780

动态规划——简单多状态专题

本篇总结了关于多状态的动态规划,整理了一些简单的算法题,也有自己的分析和参考代码

学习C++的小陈同学 479

GPU资源池化:技术原理与应用场景全解析

GPU资源池化技术已成为AI时代高效利用算力的关键方案。该技术通过硬件虚拟化、容器化编排和智能调度三个核心层面,实现GPU资源的共享与优化,可将平均利用率从不足30%提升至60-80%。主流方案包括NVIDIA全栈解决方案、云原生Kubernetes生态及开源工具,适用于企业AI平台、大模型训练和边缘推理等场景。虽然面临性能隔离、资源碎片等挑战,但随着硬件虚拟化细化和AI驱动调度算法的发展,GPU池化正向着智能化、自动化方向演进,推动实现"算力如水电"的愿景。

技术引领业务创新 1348

【ADCU详解】PMIC电源管理集成电路详解

自动驾驶域控制器(ADCU)中的电源管理集成电路(PMIC)是高度集成的关键部件,负责为计算核心、传感器等提供高效稳定的多路电源。其核心特点包括:符合车规AEC-Q100标准、支持功能安全ASIL等级、精确的时序控制及强抗干扰能力。PMIC由开关稳压器、LDO、时序控制器、监控保护电路等模块组成,通过分层电源树框架实现电能分配。设计需考虑效率、功率密度、噪声性能等关键维度,底层基于Buck转换器和LDO原理工作。使用中需满足严苛的车规环境要求,并通过静态/动态测试及故障注入测试进行验证,确保系统可靠性和安全

qq_40844444的博客 834

北大硕士LeetCode算法专题课--动态规划和贪心算法

北大硕士LeetCode算法专题课--动态规划和贪心算法

技术专家 520

ovs实现lb负载均衡

负载均衡器的实现原理是通过硬件或软件设备将客户端访问流量根据转发策略分发到多个服务器或设备上,以确保系统的负载均衡。二层负载均衡‌:使用虚拟MAC地址方式,根据OSI模型的二层进行负载均衡。‌四层负载均衡‌:基于IP+端口的负载均衡,主要分析IP层及TCP/UDP层,实现四层负载均衡。‌七层负载均衡‌:从应用层开始,根据虚拟的URL或IP、主机名接收请求,再转向相应的处理服务器。

bobi的博客 942

算法题打卡-动态规划22题

5月份刷过,现在来看就比较简单了,先用动规五部曲走一遍,然后用三个变量代替数组来做状态压缩。先用二维数组ac,然后用一维数组做状态压缩。用二维数组ac了,做成一维数组没通过。

weixin_53915654的博客 270

VS2019编译使用log4cplus 1.2.0

logger.properties 文件。第三步,创建项目来测试,配置库。第二步,使用VS2019编译。

h a 6 6 6 c k 为 你解决复杂难题! 519

UG NX二次开发(C#)--详细讲述编程模板NXOpen_CS_Wizard的代码意义,帮你轻松进入NXOpen(C#)二次开发

有几个读者私信问我,在看了“NX1957在VS2019上二次开发的环境配置”后,能完成了UG NX二次开发(C#)模板的配置,也能根据模板创建工程,但是对工程文件.cs不甚理解;并且,在UG Styler新建完成后,其也有一个dlx文件和.cs文件,也不清楚怎么使用。本文先对UG NX二次开发(C#)模板文件进行讲解,在下一个博客中,讲解Styler新建后的模板文件。以上就是对编程模板NXOpen_CS_Wizard(c#)的讲解,其实只要明白了逻辑关系,编程实现只是时间问题,祝你好运。

GimiGimmy 1781

动态规划专题 (II):Leetcode 198 打家劫舍 + Leetcode 213 打家劫舍 II

动态规划专题 (II):Leetcode 198 打家劫舍 + Leetcode 213 打家劫舍 II Leetcode 198 打家劫舍 题目描述 你是一个专业的小偷,计划偷窃沿街的房屋。每间房内都藏有一定的现金,影响你偷窃的唯一制约因素就是相邻的房屋装有相互连通的防盗系统,如果两间相邻的房屋在同一晚上被小偷闯入,系统会自动报警。 给定一个代表每个房屋存放金额的非负整数数组,计算你在不触动警报...

CSJ_CH3COOK的博客 239

【异常】Claude Code CLI工具 模型加载异常 /init报错排查与完整解决方案 There‘s an issue with the selected model (glm-5). It

此类跨厂商模型配置报错,核心诱因是API生态的兼容性不匹配。优先使用工具原生支持的模型体系,可快速解决90%以上的同类报错;若需跨厂商使用目标模型,需完成API端点、鉴权密钥、模型ID的全链路适配,确保全流程配置合规,即可完成异常修复。

奶爸的编程之路,也就一周冷个三天 3683

动态规划【打家劫舍】

因为这是一个环形房间,从哪里开始都一样,我们可以将房间分为两组,第一组就是从第一个房间到倒数第二个房间,然后第二组就是第二个房间到倒数第一个房间,然后得出这两组所求的最大金额,返回的就是两组当中最大金额的最大值,第几个到第几个的房间偷取的最大金钱数和打家劫舍1情况相同。假设数组为num,那么dp[0]为num[0],dp[1]为max(num[0],num[1]),通过遍历我们的房屋,那么就可以得到dp[i]=max(dp[i-1],dp[i]+dp[i-2])你是一个专业的小偷,计划偷窃沿街的房屋。

2301_81253185的博客 2153

本地构建AI智能分析助手之 05 PandasAI如何MySQL数据库 (教程含源码)

与 PostgreSQL 连接器类似,MySQL 连接器允许您连接到 MySQL 数据库。即使您不熟悉 MySQL 或 PandasAI,它也设计得易于使用。

iCloudEnd的博客 694

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

动态规划之打家劫舍

最后在此,送坚持到这里的读者一句话。简单题,用来培养方法;难题,用来突破自我;两者结合,方能突破至高;当难题,难得你受不了时,恰恰是因为你没有重视简单题!希望大家有所收获。

2302_80067378的博客 1950

SIMATIC S7-1200, S7-1500 PID 控制[手册]

SIMATIC S7-1200, S7-1500 PID 控制[手册]

【动态规划】打家劫舍类问题

主要介绍了动态规划中“打家劫舍”相关问题的解决方法

acm_pn的博客 4409

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

【算法】动态规划(三)——打家劫舍系列问题

【C语言】用动态规划解决leetcode上打家劫舍Ⅰ、打家劫舍Ⅱ以及打家劫舍Ⅲ

Dusong_的博客 2128

【算法专题】动态规划之简单多状态 dp 问题

算法专题之动态规划 - - - 简单多状态 dp 问题

YoungMLet的博客 2209

LeetCode动态规划篇:经典打家劫舍问题

经典动态规划题

玦尘的博客 1999

打家劫舍系列(动态规划、二分查找、贪心)

打家劫舍系列

Teriri_的博客 1746

算法第34天|动态规划:打家劫舍Ⅰ、打家劫舍Ⅱ、打家劫舍Ⅲ

打家劫舍1、如果遇到了对dp数组的前几个值定义,在进行遍历时,要思考前几个值还需不需要遍历2、这道题其实没有出现,前边的题型中出现过dp递推公式中出现min:在初始化的时候一定要注意普通位置要初始化为INT_MAX而不能是0.打家劫舍Ⅱ1、增加了额外条件圆形,所以分情况讨论:放首不放尾,放尾不放首,首尾都不放2、注意:dp[start] = max(nums[start],nums[start+1]);

m0_47408374的博客 1308

Java之动态规划之四次打家劫舍问题

一番侦察之后,聪明的小偷意识到“这个地方的所有房屋的排列类似于一棵二叉树”。你是一个专业的小偷,计划偷窃沿街的房屋。每间房内都藏有一定的现金,影响你偷窃的唯一制约因素就是相邻的房屋装有相互连通的防盗系统,此题与上一题基本相似,主要的一处不同就是这一题的房子是首位联通的,说明如果你选择了第一个房间,就不能选择最后房间了.你是一个专业的小偷,计划偷窃沿街的房屋,每间房内都藏有一定的现金。同时,相邻的房屋装有相互连通的防盗系统,对于解决这样的动态规划的背包问题,还是采用通用的五个步骤。,小偷能够盗取的最高金额。

qq_64580912的博客 1664

算法学习——LeetCode力扣动态规划篇5(198. 打家劫舍、213. 打家劫舍 II、337. 打家劫舍 III )

算法学习——LeetCode力扣动态规划篇5(198. 打家劫舍、213. 打家劫舍 II、337. 打家劫舍 III )

拉依达不拉跨的博客 1608

算法整理——【动态规划练习(6)打家劫舍】

本篇博客来整理用动态规划解决打家劫舍系列问题。

m0_63099455的博客 927

破解打家劫舍:动态规划与二分查找的高效算法

本文介绍了四种不同条件下的“打家劫舍”问题解决方案,包括一维和二维动态规划、环形房屋处理、二叉树结构房屋以及最小窃取能力的二分查找方法。

数据与算法架构提升之路专栏 1188
上一篇: [C++复习]特殊类设计{不能被拷贝 只在堆上创建 只能在栈上创建 不能被继承 饿汉单例/懒汉单例}
下一篇: 【C++复习】经典笔试题
阿猿收手吧!
阿猿收手吧! 优质创作者: C/C++技术领域 优质创作者: C/C++技术领域
博客等级 码龄4年 7251粉丝 536原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

阿猿收手吧!

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值