第10章 shellcode实战：14 第二种shellcode编写实战(3)

PE应用免杀 之 shellcode 编写

本文介绍了Shellcode的基础知识和编写过程。Shellcode是一种不依赖环境的可执行代码，通常用于渗透测试和二进制漏洞利用。文章重点讲解了Shellcode编写的注意事项：绝对避免直接使用字符串，必须采用字符数组或动态加载方式处理字符串。具体编写过程包括：通过Hash对比获取函数地址、处理导出表获取GetProcAddress、定义函数原型、处理字符数组、生成Shellcode字节码等步骤，最终生成可注入的机器码。文中还提供了一个完整的Shellcode示例代码，展示了如何通过字符数组方式实现字符串

DeepSeek 框架和技术栈分析

DeepSeek 诞生于对更高效、更强大的深度学习计算和模型训练的追求。随着深度学习模型的规模不断增大，如大型语言模型（LLMs）和复杂的视觉模型，传统的框架在处理这些大规模模型时面临着性能瓶颈和资源利用效率低下的问题。DeepSeek 旨在解决这些问题，通过优化框架设计和采用先进的技术栈，实现更高效的模型训练和推理，同时降低计算成本。

grafana 配置页面告警

Rate 下拉选择也可，保持默认也可。By label 选择一个比如选择filename。配置无数据或者错误数据的时候如何处理，这里选择 Normal （表示当做正常不会告警）单机 node_name 标签，选择一个主机，选好后单机 Show logs。单机 New floder，如果之前配置过，也可以选择。单机 Save contact point 保存即可。会跳出如下对话框（如果没有跳出就自己单机选择下）完成后会自动生成如下图，告警规则部分就配置好了。选择告警接收方式（这里选择企业微信 WeCon）

Quartus II设计程序计数器PC、由PC产生ROM的地址（含仿真）

设计程序计数器PC，正常工作模式下，系统启动，设置PC的初始值，之后每来一个clk，PC的输出值应该增加1；当程序发生跳转时，PC的值应该发生改变，级将跳转的地址值赋进行输出。PC后端连接一个ROM，由PC来产生ROM的地址，仿真进行验证。

qt实现程序密钥注册功能，MD5加密+AES加密，并实现一台电脑系统一个密钥

qt实现了一个给自己软件加密的功能。 原理是： 需要被注册的软件第一次运行的时候，在系统的注册表里面注册一个键值，如下： 这个值作为生成密钥的用户识别号，然后生成密钥文件key.db，把这个key.db文件放到软件执行目录下，即可完成软件的注册并正常使用软件。 软件第一次打开的界面及密钥生成工具软件界面如下： 将密钥生成工具软件生成的key.db放到软件执行目录下之后，软件即可正常使用，如下图： 代码使用了MD5加密 外加 AES加密， 解密和加密的核心代码如下： QSt.

车载机器人终极解决方案：从功能叠加到生态融合的颠覆性变革

本文提出一种融合智能汽车与家居技术的车载机器人架构。其创新点包括：1)基于多模态传感器的拟人化硬件设计，实现声源定位误差<5°、体温检测精度±0.3℃；2)跨模态情感计算引擎，综合面部表情、心率等数据构建三维情绪模型；3)协议自适应中间件，支持小米、华为等多品牌智能家居设备即插即用；4)环境自适应舵机控制，-30℃环境下扭矩保持率达92.5%。测试数据显示，该方案使交互步骤减少60%，用户满意度提升58%，日均使用时长增加2.3倍，为"人-车-家"生态融合提供了可行技术路径。

视觉Transformer实战 | Cross-Attention Multi-Scale Vision Transformer（CrossViT）详解与实现

Vision Transformer (ViT) 在计算机视觉领域取得了巨大成功，但标准 ViT 结构在处理不同尺度的视觉特征时存在局限性。双分支 ViT (Cross-Attention Multi-Scale Vision Transformer, CrossViT) 通过引入双分支结构来解决这一问题，能够同时捕获局部和全局视觉特征。本文将详细介绍 CrossViT 的技术原理，并使用 PyTorch 从零开始实现 CrossViT 模型。

杰理SDK入门教程（二）：USB升级程序

开发板升级操作指南 摘要：本文介绍了开发板程序升级的两种方式（常规升级和串口升级），重点说明了常规升级的操作步骤： 拨码设置：提供4种拨码方式（不拨/1档/2档/3档），对应不同指示灯状态和按键要求 硬件连接：强制升级工具需正确连接电脑和开发板（注意USB接口方向） 升级流程：根据拨码状态操作按键，观察指示灯变化（红灯常亮绿灯灭表示进入升级模式） 执行升级：运行SDK中的download.bat完成升级 文中还包含拨码开关说明、指示灯状态对照表以及升级原理说明，帮助用户理解升级过程。升级成功后在设备管理器可

企业AI数据资产评估的自动化工具：AI应用架构师的使用指南

在AI驱动的企业数字化转型中，数据资产是支撑模型训练、业务决策的核心燃料。然而，80%的AI项目失败源于数据问题——低质量数据导致模型偏差、未评估的风险引发合规危机、价值不明确的数据浪费资源。手动数据资产评估效率低、易出错，无法满足规模化AI应用需求。本文将以AI应用架构师的视角，拆解企业数据资产评估的核心逻辑，用"餐厅选食材"的生活化比喻解释复杂概念，结合自动化工具的技术原理与实战案例，教你如何从0到1搭建数据资产评估体系。无论是数据质量检测、价值量化还是风险防控，你都能找到可落地的工具方案与实践步骤。

ssm框架搭建

这个是一个在idea上成功跑起来的ssm框架项目，保存在这里方便以后使用直接下载

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain&#39;s apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath(&#39;DeepLearnToolbox&#39;));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand(&#39;state&#39;,0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W&#39;); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand(&#39;state&#39;,0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = &#39;sigm&#39;;%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, &#39;Too big error&#39;);```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand(&#39;state&#39;,0)sae = saesetup([784 100]);sae.ae{1}.activation_function = &#39;sigm&#39;;sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)&#39;)% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;;nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, &#39;Too big error&#39;);```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x&#39;,28,28,60000))/255;test_x = double(reshape(test_x&#39;,28,28,10000))/255;train_y = double(train_y&#39;);test_y = double(test_y&#39;);%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you&#39;ll get around 1.2% errorrand(&#39;state&#39;,0)cnn.layers = { struct(&#39;type&#39;, &#39;i&#39;) %input layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 6, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %sub sampling layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 12, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, &#39;Too big error&#39;);```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, &#39;Too big error&#39;);%% ex2 neural net with L2 weight decayrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex3 neural net with dropoutrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex4 neural net with sigmoid activation functionrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex5 plotting functionalityrand(&#39;state&#39;,0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = &#39;softmax&#39;; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand(&#39;state&#39;,0)nn = nnsetup([784 20 10]); nn.output = &#39;softmax&#39;; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);```[](https://bitdeli.com/free "Bitdeli Badge")

VC中sqlite的使用

在VC中对sqlite的使用，实现数据库大批数据的快速插入，读取数据库中的数据在ListCtrl中显示