网络系统实现技术之IPX与SPX

深入理解网络协议：ICMP与NetWare技术

本文深入探讨了互联网控制消息协议（ICMP）的功能及其在网络安全中的作用，并对NetWare网络操作系统和NetBIOS技术进行了详细解读。通过分析ICMP头部结构和NetWare中IPX协议的数据封装，揭示了协议在数据通信中的关键作用。同时，探讨了如何通过SAP和SPX协议优化网络资源的管理和服务广告，以及这些技术对网络安全的潜在影响。

IPX425.zip

文件内容包括： ixp42x-product-line-network-processors-datasheet.pdf IXP425 brief.pdf 在Intel Ixp425网络处理器上构建嵌入式Linux系统.pdf Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor Developer’s Manual

基于Java+SpringBoot+Vue的中小企业设备管理系统的设计与开发(源码+lw+部署文档+讲解等)

💗博主介绍：✌新人博主,工作经验两年+、专注于Java、小程序技术领域和毕业项目实战✌💗🌟文末获取源码+数据库🌟

宏杉MacroSan存储开局指导-流程

目录 1. 导入ODSP授权 2.1.版本确认 2.2.存储设备升级U盘、升级光盘制作方法 开局流程如下： 1. 导入ODSP授权 ODSP授权文件随设备附带,拆箱可见 2.1.版本确认 java模式 html模式 2.2.存储设备升级U盘、升级光盘制作方法 准备工具 空白U盘： 1个，容量要求大于等于4GB。仅制作升级U盘时需要。 制作升级U盘步骤 1.将U盘插入PC机USB口，保证PC机能识别到U盘。 2.运行UltraISO，选择菜单中的 文件-&g...

[EDA系列]二、Altium Designer异形封装实战：从CAD导入到PCB布局

本文详细介绍了在Altium Designer中实现异形封装的实战流程。通过五步核心操作，将CAD软件中的复杂二维轮廓精准导入并转换为可直接用于PCB布局的智能封装，解决了不规则形状铺铜的难题，特别适用于射频天线、传感器外壳等对机械尺寸有严苛要求的设计场景。

15、基于最优传输的协作多视图聚类框架

本文提出了一种基于最优传输理论的协作多视图聚类框架，通过引入协作学习机制在不同视图间建立先验交互，以提升共识聚类的质量。框架包含两种新方法：协作共识投影方法（CoCP）和基于新表示的协作共识方法（CoCNR）。CoCP在全局空间中整合多视图信息并进行共识投影，而CoCNR则通过协作编码生成新的数据表示以实现更优聚类。方法利用熵正则化的Wasserstein距离与Wasserstein重心，有效捕捉数据分布间的几何结构，并通过聚合步骤获得统一模型。实验结果表明，所提方法在多个数据集上均优于现有方法，具有良好的

通信原理 | 随机数仿真 | 均匀、正态、双高斯、瑞利、莱斯、对数正态、nakagami、Suzuki分布的随机数仿真（matlab）

信道建模在通信系统设计和分析中扮演着至关重要的角色。它指的是使用数学和物理模型来描述和模拟无线或有线通信路径中的信号传播特性。

杰理AC695N系列芯片 LED7数码管使用教程

杰理AC695N数码管使用摘要 本教程介绍了杰理AC695N芯片驱动LED7数码管的实现方法： 硬件配置：支持7/12/13脚三种数码管类型，详细说明了7脚数码管的标准段码定义和GPIO接线方式。 软件设置： 通过修改配置文件启用LED7功能 配置GPIO引脚映射（PORTC/PORTA组） 选择与硬件匹配的真值表 层次架构：包含硬件层、驱动层、UI层和应用层的完整设计，支持数字、字符和图标显示功能。 实现要点包括正确配置引脚类型、选择真值表，并通过UI风格设置为LED7模式。

老版QQ原生表情gif动态

这是老版的QQ表情，不过全是动态的的，Windows照片查看器是不会动的，可以右击用浏览器打开查看，再说一遍是老版的，只是分享给宁愿用老版也要动态的人。

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

android 蓝牙通讯demo

android 下蓝牙通讯demo，实现了发现蓝牙，使能蓝牙，通过蓝牙发送消息。