ESP32-S3驱动OV3660摄像头原理图设计，已量产

Arduino、ESP32驱动OV3660摄像头实现EdgeImpulse图像识别（摄像头支持红外夜视、边缘AI计算）

ESP32-S3 AI智能摄像头模块是一款专为智能家居和物联网应用打造的高性能边缘AI开发模组。它集成了摄像头、麦克风、音频功放、环境光传感器和夜视补光灯，无需依赖云端即可实现本地化AI推理。

量产级硬件原理图设计指南：专栏总述

本专栏基于138款已量产产品原理图，系统拆解摄像头、显示音频、通信接口、ADC/DAC、电源、驱动与多类传感器模块的量产设计，覆盖器件选型、供电、接口保护、EMC、Layout兼容及常见故障规避。

机器视觉硬件开发闭环：从OV2640驱动到PCB信号完整性设计

机器视觉是嵌入式边缘智能的核心感知技术，其端侧落地依赖光学、模拟电路、数字时序与PCB物理实现的深度协同。理解DVP接口时序约束、电源域分割原理及阻抗匹配规则，是解决图像撕裂、噪点突增、帧率抖动等工程问题的技术基础。在ESP32-S3等MCU平台上，OV2640传感器驱动需绕过抽象层直控LCD_CAM寄存器，结合DMA双缓冲与定点形态学运算，才能兼顾实时性与资源效率。本文聚焦机器视觉硬件开发闭环，覆盖原理图解读、PCB信号完整性设计、热管理优化及嘉立创EDA实战复现，为毕业设计、工业缺陷检测与智能硬件量产提

OV3660 调试说明文档

OV3660模块的参数配置指导文档

Android SDK 国内镜像及配置方法(2025最新，包好使！)

android sdk 国内镜像配置方法，纯小白避坑指南，2025最新，亲测包好使！还有包奉上！

VSCode+Typst零配置写作指南：5分钟搞定论文排版环境（含实时预览技巧）

本文介绍如何利用VSCode和Typst快速搭建零配置的论文排版环境，5分钟内实现高效写作与实时预览。Typst作为轻量级排版工具，结合LaTeX的精度与现代化语法，显著提升学术写作效率，特别适合需要频繁调整格式的研究人员。

✨使用 vLLM + Docker 部署 Qwen3-Embedding-8B 并实现高效文本向量生成（附 `curl` 测试）

本文介绍了如何使用 vLLM 和 Docker 部署 Qwen3-Embedding-8B 嵌入模型服务，并通过标准 OpenAI 兼容接口进行调用和结果解析。如果你在部署中遇到任何问题，欢迎留言讨论！

EXCEL实现分层自定义比例随机抽样（图+文教程）

EXCEL实现分层自定义比例随机抽样（图+文教程） 单一字段分层自定义比例随机抽样 多字段分层自定义比例随机抽样 单一字段分层自定义比例随机抽样 首先数据源如下，我们想随机抽张三的金额数据10%、李四金额20%、王五5%、哈哈15%、李六10% 首先第一步，添加辅助列，随机数 =RAND() 对数据进行高级排序 升序、降序都可以 添加辅助列...

用matlab编程求矩阵的极大无关组,向量组极大无关组表示问题

已知向量组T:Eqn11.gif (3.16 KB, 下载次数: 1)2013-10-21 19:19 上传.(1) 求向量组T的秩，并判断向量组T的相关性；(2) 求T的极大线性无关组；(3) 将其余的向量用所求的极大线性无关组线性表示。程序：>> A=[1 1 3 2;-1 1 -1 3;5-2 8 9;-1 3 1 7]>> r=rank(A)>> A1=...

腾讯、飞书等在线表格自动化编辑--python

在线文档自动化处理数据

PicoRV32 笔记 05

PicoRV32 本地总线接口

基于Simulink的永磁同步电机容错控制(缺相容错)

本文基于Simulink平台，详细介绍了永磁同步电机(PMSM)缺相容错控制的仿真实现方法。针对逆变器开路故障导致的缺相问题，提出"检测-重构-补偿"三阶段控制策略：采用电流阈值法快速检测故障（<5ms），重构αβ坐标系实现两相矢量控制，并通过谐波电流注入抑制转矩脉动（<8%）。仿真结果表明，该方法能有效维持故障后电机运行，转速波动<3%，满足电动汽车等关键应用的可靠性需求。文章包含完整的Simulink建模步骤、MATLAB函数代码及参数设置，为工程实践提供了可复现的

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain&#39;s apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath(&#39;DeepLearnToolbox&#39;));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand(&#39;state&#39;,0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W&#39;); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand(&#39;state&#39;,0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = &#39;sigm&#39;;%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, &#39;Too big error&#39;);```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand(&#39;state&#39;,0)sae = saesetup([784 100]);sae.ae{1}.activation_function = &#39;sigm&#39;;sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)&#39;)% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;;nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, &#39;Too big error&#39;);```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x&#39;,28,28,60000))/255;test_x = double(reshape(test_x&#39;,28,28,10000))/255;train_y = double(train_y&#39;);test_y = double(test_y&#39;);%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you&#39;ll get around 1.2% errorrand(&#39;state&#39;,0)cnn.layers = { struct(&#39;type&#39;, &#39;i&#39;) %input layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 6, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %sub sampling layer struct(&#39;type&#39;, &#39;c&#39;, &#39;outputmaps&#39;, 12, &#39;kernelsize&#39;, 5) %convolution layer struct(&#39;type&#39;, &#39;s&#39;, &#39;scale&#39;, 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, &#39;Too big error&#39;);```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, &#39;Too big error&#39;);%% ex2 neural net with L2 weight decayrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex3 neural net with dropoutrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex4 neural net with sigmoid activation functionrand(&#39;state&#39;,0)nn = nnsetup([784 100 10]);nn.activation_function = &#39;sigm&#39;; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex5 plotting functionalityrand(&#39;state&#39;,0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = &#39;softmax&#39;; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand(&#39;state&#39;,0)nn = nnsetup([784 20 10]); nn.output = &#39;softmax&#39;; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, &#39;Too big error&#39;);```[](https://bitdeli.com/free "Bitdeli Badge")

C# WinForm 基于DirectShow.dll编写的程序，可边预览边保存视频，音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择（默认选中第一个）2.可录制wmv和avi两种格式的视频并且都带有音频，avi可以录制的分辨率和帧数进行选择，wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照，也可边录制视频边拍照4.添加了视频和音频的压缩功能（酌情使用）这次二次开发发现C#对DirectShow的相关信息太少，这次做完也不敢藏私共享出来，还望大家指正

ET2012新版免狗免安装绿色软件

ET2012新版免狗免安祖昂绿色软件。，新界面，新视觉，

文档：亲测可用解决vnc灰屏，黑屏，鼠标大黑叉情况

主要解决vnc-viewer灰屏，黑屏，鼠标大黑叉等现象，详细见文档。