想进BTAJ，东软java面试题

JavaSwing_2.8: JTextArea（文本区域）

JTextArea，文本区域。JTextArea 用来编辑多行的文本。JTextArea 除了允许多行编辑外，其他基本用法和 JTextField 基本一致。

固定时间收敛的控制器设计（基础知识）

针对控制系统的有限时间收敛和固定时间收敛给出一些常用定理。

VCS 2018 环境下，手把手教你用 UVMC 搞定 SystemC 和 SystemVerilog 混合仿真（附完整代码）

本文详细介绍了在VCS 2018环境下使用UVMC实现SystemC和SystemVerilog混合仿真的完整指南。从环境配置、工具链设置到UVMC通信机制解析，提供了实战案例和高级调试技巧，帮助开发者高效搭建复杂验证环境。特别适合需要处理跨语言仿真的芯片验证工程师。

《物联网技术》课程笔记——第二章 物联网技术架构

文章目录第二章：物联网技术架构1 物联网技术体系（C3SD）2 系统体系结构的基本概念3 物联网体系结构——信息传递视角3.1物联网感知层3.1.1 感知层要解决的问题3.1.2 感知层的形态3.1.3 节点的感知能力与控制能力3.1.4 感知层实例3.2 物联网网络层3.2.1 网络相关概念3.2.2 IPV6与IPV4相比互联网协议的升级3.2.3 计算机网络的逻辑层次3.2.4 传输网的拓扑结构3.2.4.1 举例：智能小区的三表采集系统3.2.4.2 接入层3.2.4.2 汇聚层3.2.4.2 核心

置顶必读(1) |《YOLOv8实战：从入门到深度优化》专栏导读，带你一文了解本专栏！

🏆 本文收录于 《YOLOv8实战：从入门到深度优化》 专栏，该专栏专注于分享我在YOLOv8目标检测模型中的实战经验，涵盖从入门基础到深度优化的全方位解决方案。无论你是计算机视觉的新手，还是具有多年深度学习经验的专家，本专栏都将为你提供高效、可复现的技术方案，助你掌握YOLOv8的核心技术，提升目标检测性能，突破瓶颈，优化模型，并加速项目开发🚀！

【从零开始学习 UVM】1.1、UVM 概述 —— Preface

【从零开始学习 UVM】1.1、UVM 概述 —— Preface

【局部规划模块曲线算法】曲线平滑介绍

本文先对轨迹平滑问题做个简单的介绍，具体内容后续再更，其他模块可以参考去我其他文章提示：以下是本篇文章正文内容（1）适合给移动机器人运动的路径【满足运动学，高阶平滑】（2）高阶的运动学不能够突变的【至少三阶的加速度不能突变，最好四阶的jerk和五阶的snap也不能突变】（3）在转弯的地方不会停下来（4）加减速均衡，节省能量（5）节省时间的。

MTK（camera篇）Camera整体点亮

本文介绍了在MTK平台上添加新Camera Sensor的驱动开发流程。主要内容包括：1）MTK Camera采用HAL3架构，驱动层主要负责sensor电源控制和寄存器操作；2）详细说明了添加新sensor需要在多个文件中进行的修改，包括设备树配置、内核头文件、驱动列表、电源序列等；3）特别指出需要配置I2C地址表，并导入tuning文件和metadata文件以完善ISP处理流程。文章提供了完整的文件修改清单，涵盖了从内核层到HAL层的完整开发过程，为MTK平台Camera Sensor驱动开发提供了具体

python爬虫项目（一百九十八）：电商平台用户行为数据分析与推荐系统、爬取电商平台用户行为数据

本文详细介绍了如何通过爬虫技术抓取电商平台的用户行为数据，并结合数据分析技术，构建一个简单的推荐系统。使用Selenium模拟用户操作抓取动态网页数据，并通过API接口直接获取用户行为数据，能够为后续的用户行为分析提供基础数据。我们结合了基于用户协同过滤、基于商品协同过滤和矩阵分解等方法，构建了不同的推荐系统。实际应用中，可以进一步优化推荐算法，利用更复杂的深度学习技术和更高效的数据处理方法，提升推荐的准确性和个性化程度。

lwip-2.0.3

lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

C# WinForm 基于DirectShow.dll编写的程序，可边预览边保存视频，音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择（默认选中第一个）2.可录制wmv和avi两种格式的视频并且都带有音频，avi可以录制的分辨率和帧数进行选择，wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照，也可边录制视频边拍照4.添加了视频和音频的压缩功能（酌情使用）这次二次开发发现C#对DirectShow的相关信息太少，这次做完也不敢藏私共享出来，还望大家指正