【源码在文末】趣玩Python——如何帮女朋友快速抢票！

今日主题：当我用Cursor10写了一个12306的抢票脚本

这个项目充分展示了如何用Python快速实现一个实用的自动化工具。通过Cursor的AI辅助功能，我们只用了10分钟就完成了这个抢票脚本的开发。

抢票小程序

还在为买不到票而犯难吗？这里有一套程序来帮助你解决，但是禁止用做商业用途哦！

用Python抢火车票的简单小程序实现解析

主要介绍了用Python抢火车票的简单小程序实现解析,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下

robomimic实验复现全流程指南：从数据集下载到训练视频生成

本文提供了RoboMimic实验复现的完整实战指南，重点解析了从数据集下载、配置文件定制到模型训练与评估的全流程。以tool_hang任务为例，详细说明了环境准备、数据获取、训练监控及视频生成等关键步骤，并针对常见问题给出了排查方案，帮助研究者高效完成机器人模仿学习实验的闭环验证。

Verilog仿真必备：FSDB dump命令全解析与实战配置指南

本文深入解析了Verilog仿真中FSDB波形记录的核心命令与实战配置技巧。针对大规模SoC验证场景，详细介绍了如何通过$fsdbDumpvars、$fsdbDumpfile等命令实现信号精准捕获、文件体积控制和动态启停，并提供了智能化的分层dump策略，帮助工程师在保证调试信息完整性的同时，大幅提升验证效率并有效管理波形数据。

UE5导入MetaHuman虚拟头像后，连接live link face，面部表情捕捉出错修正

UE5 利用live link face 驱动meta human面部表情捕捉

LangChain与SkillLite集成：AI Agent安全沙箱实践

在AI与自动化技术领域，安全沙箱是实现可信计算的核心机制。其原理是通过资源隔离与权限控制，构建受限的执行环境。技术价值在于平衡功能开放性与系统安全性，尤其适用于处理用户提交的非受信代码或敏感数据。典型应用场景包括AI插件系统、在线代码评测平台等。本文以LangChain框架与SkillLite沙箱的深度集成为例，详解如何通过命名空间隔离、cgroups限制等机制，为AI Agent赋予安全执行动态技能的能力。其中涉及的关键技术点包括Python运行时隔离、动态资源配额管理，以及如何防范Shell注入等常见攻

Aveva Marine C# 二次开发入门001

1# 引用 C:\AVEVA\Marine\OH12.1.SP4\Aveva.ApplicationFramework.dll C:\AVEVA\Marine\OH12.1.SP4\Aveva.ApplicationFramework.Presentation.dll 2# 引用命名空间， using Aveva.ApplicationFramework.Presentation;usi...

Python爬虫实战：绕过Cloudflare反爬的最新技术与完整代码详解

在互联网数据采集领域，越来越多的网站开始部署CDN和安全防护服务，其中 Cloudflare 是最为广泛使用的防护方案之一。它不仅为网站提供DDoS防护，还能通过JS挑战、验证码和行为分析来识别并拦截爬虫。这给爬虫工程师带来了极大挑战——如何在不违反网站服务条款的情况下，实现有效的数据采集？本文将分享Python领域绕过Cloudflare反爬的最新技术方法，结合最新流行库与自动化浏览器，帮助你攻克这一难题。绕过Cloudflare反爬不是一蹴而就，需结合多技术、多策略，持续迭代。

第 5 篇：责任链模式 (Chain of Responsibility) —— 协议栈的流水线

本文介绍了责任链模式在嵌入式通信协议解析中的应用。针对传统"面条式"代码维护困难的问题，提出将各协议解析器解耦为独立处理单元，通过链表形式串联。文章详细展示了模式实现：定义抽象处理者接口、实现具体协议处理器、构建链表管理器。该方案具有内存占用低(O(1)栈空间)、可动态扩展、支持优先级调整等优势，并探讨了性能优化策略及动态插件系统等扩展应用，为嵌入式通信协议处理提供了清晰的架构方案。

DLMS/COSEM协议的理解体会

DLMS是通信协议，COSEM是电表建模规范。HDLC帧基本格式为0x7e......

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用，资源的后缀为tar.gz格式的压缩包

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

蓝牙模块HM-10手册

蓝牙模块HM-10手册，该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。