如何通过conda安装HyPhy教程

PMC 城域OTN处理器 HyPHY_Flex产品框图.pdf

PMC 城域OTN处理器 HyPHY_Flex产品框图,包含： OTN在城域网中的机遇；新一代针对城域应用的 OTN；紧凑型城域接入设备应用；OTN/

进化树分析软件

进化树分析简单方便

新手网工别慌！手把手带你搞定华为OLT开局配置（从登录到业务下发全流程）

本文为新手网络工程师提供华为OLT设备开局配置的详细指南，涵盖从设备登录、基础配置到业务部署的全流程。通过实战案例和常见问题排查，帮助读者快速掌握华为OLT配置技巧，确保业务顺利开通。

保姆级教程：用Unidbg搞定阿里系App的x-sign和长x-mini-wua签名（附完整Java代码）

本文详细介绍了如何使用Unidbg框架模拟执行阿里系App的原生库，生成关键的x-sign和x-mini-wua签名参数。通过完整的Java代码示例和实战技巧，帮助开发者高效实现签名算法，适用于安全研究、数据分析和第三方应用开发场景。

Oracle Scheduler任务故障诊断 实战指南

当基础环境无异常时，需聚焦任务本身的配置与状态。定义（JOB）→ 调度（SCHEDULE）→ 执行（SLAVE进程）→ 日志（LOG），每个环节都可能存在卡点。Oracle Scheduler任务的“隐性故障”看似棘手，实则是环境配置、资源竞争、时间逻辑等问题的集中体现。通过本文的诊断工具和排查思路，你可以构建从“基础环境→任务配置→执行链路→日志追踪”的全维度分析体系，让每一个“消失”的任务都无所遁形。

使用 git一个仓库管理多个项目

我们需要在 git 里面创建一个空分支，该分支不继承任何提交，没有父节点，完全是一个干净的分支，这时候就需要使用 orphan。该命令会创建一个新的分支，并且该分支有前一个分支下的所有文件，我们不想提交任何内容，所以我们需要把当前内容全部删除。此时 master 分支已经有一个项目了，下面我们创建新的分支管理另一个项目。此时可以在该分支目录上初始化你的项目，在执行 git 命令提交代码。此时我们就完成了在同一个仓库管理不同项目的需求了。下载仓库到本地之后，进入项目目录，查看分支信息。

永磁同步电机矢量控制——电流内环前馈解耦策略

在采用永磁同步电机矢量控制时，ud和uq的指令值存在耦合项。需要对其进行解耦，目前，常用的解耦设计方法有前馈解耦、偏差解耦以及内模控制，本文主要分享电流内环前馈解耦控制策略。

24、流化催化裂化的分子建模

本文探讨了流化催化裂化（FCC）的分子建模方法，重点分析了如何通过机理建模和模型修剪策略（如反应规则和随机规则）来减少计算复杂度，同时保持化学意义。文章还介绍了定量结构反应性关联（QSRC）在动力学参数确定中的应用，以及结焦对催化剂活性的影响。通过这些方法，FCC反应模型能够在预测产物分布的同时，显著提高计算效率。

详细介绍用MATLAB实现基于A*算法的路径规划（附完整的代码，代码逐行进行解释）（一）--------A*算法简介和环境的创建

   本系列文章主要介绍基于A*算法的路径规划的实现，并使用MATLAB进行仿真演示。    一、 A*算法简介       A*（A-Star)算法是一种静态路网中求解最短路径最有效的直接搜索方法，也是解决许多搜索问题的有效算法。算法中的距离估算值与实际值越接近，最终搜索速度越快。      公式表示为： f(n)=g(n)+h(n),其中， f(n) 是从初始状态经由状态n到目标状态的代价估计，g(n) 是在状态空间中从初始状态到状态n的实际代价，h(n) 是从状态n到目标状态的最佳路径的估计代价。

rk3576 适配摄像头 (mipi 五摄)

在RK3576上实现五路CSI摄像头方案，核心思路是充分复用其视频输入接口，并通过巧妙的软件配置来实现。

Devexpress16.2.6破解工具

Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具

Camera2Demo

在Camera2 的基础上进行封装，使得Camera2一堆初始化逻辑与Activity分离，降低耦合度，完成预览拍照并保存的操作

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

数学建模模型总结

这是本人在两年内准备参加数学建模竞赛搜集到的模型资料，已经经过了本人的筛选和整理，希望能够对准备参加数学建模竞赛的学弟学妹们提供一些帮助！