IEC 60794-2-10:2023 室内光纤电缆 - 单工和双工电缆系列规范

原创已于 2023-09-02 16:31:06 修改 · 1.5k 阅读

0 ·

本内容遵循CC 4.0 BY-SA版权协议

收录于

标准快递

于 2023-04-10 12:55:42 首次发布

国际电工委员会(IEC)发布了《光纤电缆——第2-10部分：室内光纤电缆——单工和双工电缆系列规范》的新版标准IEC60794-2-10:2023。该标准涉及室内使用的单工和双工光纤电缆，包括技术修订，如更新规范性引用文件和光纤类别的命名。此版本替代了2011年的第二版。

IEC 60794-2-10:2023 室内光纤电缆 - 单工和双工电缆系列规范

2023年3月10日，国际电工委员会发布标准《光纤电缆——第2-10部分：室内光纤电缆——单工和双工电缆系列规范》。

IEC 60794-2-10:2023标准的RLV版本已经可获取，其中包括国际标准与其批注版本，同时包括了与上一版相比所有变更的技术内容。

IEC 60794-2-10:2023适用于室内使用的单工和双工光纤电缆。IEC 60794-2适用于本文件涵盖的电缆。对于 ISO/IEC 11801-1 规定的用于安装在工业应用中的电缆，还需要符合MICE规范(见第 B.2 条)。本标准的第三版取消并替代了2011年发布的第二版。本版是技术修订版。相较于上一版，本版包括以下重大技术变化：

更新规范性引用文件;

更新所有相关的 A1 和 B1 光纤类别和子类别名称。

FOREWORD
1 ) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights