音频——WAV 格式详解

嵌入式音视频开发——PCM编码与WAV音频文件格式详解

本文系统介绍了音频信号采集与存储的核心技术。首先详细讲解了PCM的原理，包括采样、量化和编码三个关键步骤，重点分析了采样率、量化位等对音质的影响。其次深入剖析了WAV文件格式的RIFF结构，详细说明了RIFF头、fmt子块和data子块的具体组成和字段含义。最后通过实际代码示例展示了WAV文件头的定义和初始化方法，并分析了立体声数据在WAV文件中的存储方式。文章还通过Windows XP启动音实例，演示了如何解析WAV文件头信息并验证其音频参数。全文从理论到实践，阐述了音频数字化和和WAV文件格式的技术要点

WAV文件解析

目录 一、WAV简介 二、WAV文件结构 2.1 首部数据 2.2Format数据块 2.3Data数据块 2.4其他数据块 参考资料 一、WAV简介 WAV格式是微软公司开发的一种声音文件格式，也叫波形声音文件，是最早的数字音频格式，被Windows平台及其应用程序广泛支持。WAV格式支持许多压缩算法，支持多种音频位数、采样频率和声道，采用44.1kHz的采样频率，16位量化位数，因此WAV的音质与CD相差无几，但WAV格式对存储空间需求太大不便于交流和传播。 二、WAV文..

WAV文件格式深度解析与音频结构实战详解

经过这一番深入探索，我们可以总结出几点核心认知：WAV ≠ PCM：它是容器，不是编码。同一份文件可以承载PCM、ADPCM、浮点等多种格式。分块结构是精髓的嵌套模型提供了良好的扩展性和容错能力。字节序不能忽略：跨平台开发必须显式处理小端/大端转换。fact块很重要：尤其在非PCM场景下，它是时间轴重建的生命线。健壮性源于防御编程：面对缺失、错序、畸形数据要有降级策略。

从wav到qcp：音频格式转换详解与工具应用

wav格式，即波形音频文件格式（WAVE, Waveform Audio File Format），是由微软与IBM共同开发的一种数字音频文件格式标准。它是一种非常基础的音频文件格式，通常用于存储未压缩的音频数据。.wav格式文件的第一个版本发布于1991年，伴随着Windows 3.1操作系统一同推出，最初设计是为了支持Windows平台上的多媒体应用。由于其是最早被广泛采用的音频格式之一，.wav格式在多媒体应用领域有着悠久的历史和深厚的基础。

标准语音测试包_wav格式_中文_英文.zip

中英文的 wav格式的语音。每段语音有20秒以上。很标准，可以做语音识别使用

CCC数字钥匙Release 3实战：如何用BLE/UWB实现无钥匙进入（附避坑指南）

本文深入解析CCC数字钥匙Release 3标准下BLE/UWB无钥匙进入系统的开发实践，涵盖硬件选型、安全测距协议、时序同步等关键环节，并提供实战调试技巧与安全攻防案例。特别针对BLE芯片配置、UWB模块选型等常见陷阱给出解决方案，帮助开发者高效实现厘米级精度的数字钥匙系统。

自动驾驶开发者必看：nuscenes数据集23类物体标注全解析（附避坑指南）

本文深入解析nuscenes数据集的23类物体标注系统，为自动驾驶开发者提供全面的标注规范解读和实战避坑指南。涵盖多模态数据组织、类别细分规则、属性系统应用技巧以及标注质量验证方法，帮助开发者高效利用这一标杆数据集提升模型性能。

COMSOL电磁仿真-网格剖分-边界层

介绍COMSOL在低频电磁场中边界层网格的剖分方法。

从零到一：Zephyr RTOS 在 STM32F4 上的移植与实战（含设备树配置详解）

本文详细介绍了如何从零开始将Zephyr RTOS移植到STM32F4开发板，涵盖开发环境搭建、硬件抽象层分析、设备树配置及系统裁剪等关键步骤。通过实战案例，帮助开发者掌握Zephyr RTOS在嵌入式设备中的应用，提升物联网边缘计算设备的开发效率。

一文读懂：CAN总线Bus-Off的触发条件与自动恢复机制

本文详细解析CAN总线Bus-Off状态的触发条件与自动恢复机制。根据ISO 11898-1标准，当发送错误计数器（TEC）超过255时节点进入Bus-Off状态，并通过检测128次总线空闲条件实现自动恢复。文章结合实战案例，探讨硬件故障、软件配置及电磁干扰等常见触发场景，并提供快慢恢复策略与调试方法，帮助工程师快速定位并解决CAN网络故障。

修复后找不到ip 黑群晖_黑群晖引导U盘损坏了怎么办？

前言虽然一般来说引导U盘损坏的可能性很小，但是避免不了万一出现问题导致黑群晖没有办法引导进入系统也是一件相当麻烦的事情。这里我就用两块U盘做个小试验，看看如果黑群晖上的引导U盘损坏以后，另一块U盘需要怎样写引导文件才能让黑群晖正常引导进入系统。试验开始我这里黑群晖使用的是DSM6.1.7的系统，U盘一块使用的是闪迪的酷豆，另一块就是闪迪的酷铄。目前系统引导U盘使用的是酷豆，VID：0781 PID...

国科大学习资料--计算机视觉（胡占义、董秋雷）--2018-2019第二学期期末试卷

国科大学习资料–计算机视觉（胡占义、董秋雷）–2018-2019第二学期期末试卷 国科大学习资料–计算机视觉（胡占义、董秋雷）–2018-2019第二学期期末试卷 国科大学习资料–计算机视觉（胡占义、董秋雷）–2018-2019第二学期期末试卷 ...

SIMULINK开发项目实例 1000 例专栏之第960例--基于电力系统稳定性的建模与仿真场景：-含分布式电源的配电网电压稳定性研究

间歇性与随机性：例如，太阳能依赖于日照强度，风能依赖于风速，这使得它们的输出功率具有不确定性。逆变器接口：大多数分布式电源通过逆变器接入电网，这对电网的动态响应特性产生了影响。位置分散：通常分布在用户侧或靠近负荷中心的位置。本文详细介绍了如何使用Simulink结合Simscape Electrical 构建一个用于研究含分布式电源配电网电压稳定性的模型，并提供了详细的仿真流程说明。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术，以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索，主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式，计算机控制系统的数学描述与基本分析方法，以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明，包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。