PyQt5+Pycharm安装和配置

PyQt5+Anaconda+PyCharm安装、配置和使用

介绍了PyQt5+Anaconda+PyCharm的安装、配置和使用。 PyQt 5用于设计Ui。 Anaconda用于配置环境。 PyCharm用于写代码。

python安装PyQt5和PyQt5-tools文件+pycharm配置

pyqt5 designer可以图形化设计界面， 首先要更换安装源 默认是国外的源，比较慢，换成国内的源比较快。 国内源： 清华：https://pypi.tuna.tsinghua.edu.cn/simple 阿里云：http://mirrors.aliyun.com/pypi/simple/ 中国科技大学 https://pypi.mirrors.ustc.edu.cn/simple/ 华中...

Python3安装配置PyQt5以及PyCharm下PyQt5的测试使用

一、环境 win7 64位 python3.6.4 二、下载安装软件 1、安装Qt5.12.4版本。 2、PyCharm下安装PyQt5、PyQt5-sip、PyQt5-stubs等，注意选择和Qt5.12对应的版本，安装方法如下： 3、此时可以写一个demo测试PyQt5是否安装成功，测试代码如下： import sys from PyQt5 import QtWidgets,QtCore ...

pyinstaller打包exe报错no module named sklearn.neighbors_typedefs

pyinstall打包生成的exe文件执行时报错 no module named sklearn.neighbors_typedefs 解决方案 pyinstaller -F device_data_collect.py -p src --hidden-import sklearn.neighbors.typedefs

pycharm安装与配置Pyqt5

Pycharm安装与配置Pyqt5 1、创建一个项目、虚拟环境 打开pycharm，File->New project 2、安装pyqt5库 在PyCharm左下角的Terminal中输入： pip install PyQt5 -i https://pypi.douban.com/simple 安装常用的QT工具： pip install PyQt5-tools -i https://pypi.douban.com/simple 3、将QT工具添加到环境变量 将其安装路径添加到系统环境变量pa

Cherry Studio 新手必看：5分钟搞定MCP服务器配置（附常见问题解决）

本文为Cherry Studio新手提供了详细的MCP服务器配置指南。文章从核心概念入手，解释了Cherry Studio作为MCP客户端如何通过MCP协议安全、标准化地扩展AI助手能力。重点讲解了uv和Bun环境的安装与常见网络问题的解决方案，并演示了如何添加首个MCP服务器（如mcp-server-fetch），助你快速构建可扩展的智能工作流。

实验六 存储器实验

只读存储器（ROM）是一种在正常工作时其存储的数据固定不变，其中的数据只能读出，不能写入，即使断电也能够保留数据，要想在只读存储器中存入或改变数据，必须具备特定的条件。当地址为00000101时，会分别在数据位宽为8，16，32的只读寄存器中找到地址为00000101所对应的十进制地址位置，也就是地址为5的数据，并将其分别以8位，16位，32位输出。因此，输出保持为0。因此，当异步清零信号为1时，无论其他输入信号是什么，触发器的输出都会被强制清零，输出为0。1)寄存器输入0011，使能端1，异步清零0。

Nginx下ModSecurity模块安装详细教程

本文提供了在Nginx 1.28.0上安装ModSecurity v3的完整教程。首先需安装编译依赖，然后从源码编译安装ModSecurity库并设置优化参数。接着编译Nginx动态模块并配置加载。核心配置包括设置规则引擎、日志路径及性能优化参数。安装OWASP核心规则集后，在Nginx站点配置中启用ModSecurity。最后测试规则有效性并给出性能优化建议，如规则排除、精简规则集等。整个过程包含详细的命令和配置示例，确保安全防护功能正常运作。

一种基于OpenPose和DNN的跌倒检测软件系统(中文&英文)

学习并实现一种跌倒检测模型，此模型基于OpenPose实现逐帧人体姿态检测，使用DNN识别人体动作。检测方式有在线与离线两种，本文主要测试了离线模式，测试效果较好。

STM32驱动AD7779：双极性电源下8通道同步ADC的SPI配置与数据采集实战

本文详细介绍了在双极性电源供电下，使用STM32通过SPI接口驱动AD7779同步ADC芯片实现8通道高精度数据采集的实战经验。重点解析了电源设计、抗干扰处理、寄存器配置、SPI通信技巧及数据校准方法，帮助工程师解决工业测量中的同步采样与噪声控制难题。

扫地机器人视觉+IMU融合导航路径规划技术详解

本文介绍了基于视觉-惯性里程计（VIO）的扫地机器人自主导航系统。系统硬件由RGB摄像头、IMU传感器和编码器组成，软件架构采用分层设计，包括传感器数据采集层、数据融合层、SLAM定位层和路径规划层。核心技术包括：1）融合视觉特征提取（ORB算法）与IMU预积分的VIO；2）基于栅格地图的SLAM构建；3）结合A*全局规划和动态窗口法（DWA）局部避障的路径规划。文章提供了完整的Python实现代码，涵盖传感器数据融合、特征匹配和运动估计等关键功能模块。该系统实现了扫地机器人的精准定位和环境感知能力。

手把手教你用mitmproxy抓包抖音数据流（附Python脚本模板）

本文详细介绍了如何使用mitmproxy抓包抖音数据流，包括环境搭建、证书安装和Python脚本模板。从mitmproxy配置到抖音API解析，提供完整的移动端数据流分析方案，帮助开发者快速掌握数据抓取技术，适用于应用优化、竞品分析和安全审计等场景。

DRV8311HRRWR直流无刷（BLDC）电机驱动原理图设计

DRV8311HRRWR集成三个MOSFET 半H桥，用于驱动三相无刷直流电机（BLDC），适用于5V、9V、12V或18V直流电源轨或1S至4S电池供电应用。内部集成三个具有集成电流感测功能的电流感测放大器(CSA），可感测BLDC电机的三相电流，从而实现FOC和电流控制系统设计方案。集成保护特性：VM 欠压锁定 (UVLO)、 电荷泵欠压 (CPUV)、过流保护 (OCP)、热警告和热关断 (OTW/OTSD)、故障条件指示引脚 (nFAULT)支持 1.8V、3.3V 和 5V 逻辑输入。

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过，这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后，重新检测通过。

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册，内含HL7和ASTM)

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

efm32 入门.pdf

本PDF共计22页，介绍的是操作驱动API，下载与否自己斟酌。