Code Mode is experimental and off by default. It may change or be removed in any release. To share feedback, run
/feedback.How Code Mode works
In a Code Mode session, you still describe your task in a prompt, and Claude writes JavaScript to carry it out. One piece of code can run commands in parallel, use one result in the next call, and return the part of the output that Claude needs to read. For example, if you ask Claude to raise a retry limit, Claude might write this code to find the file, edit it, and run the tests. The last line returns the fileâs path and the test output to Claude:Ctrl+O to open the transcript viewer. Each piece of code appears there as a collapsed Code row, with a hint for how to expand it.
When to use Code Mode
Try Code Mode on tasks that take many related tool calls, such as:- A change that repeats across many files
- A search whose results need filtering before Claude reads them
- Several independent commands that can run at the same time
Code Mode limitations
Before you turn on Code Mode, check that you can accept these limits:- Resuming: you can resume a Code Mode session only in the terminal, with Code Mode on
- Auto mode: auto modeâs classifier reviews the code, not each tool call
- Long-running code: unless code can run in the background, you wait for it to finish, and it stops after ten minutes
- Hooks: you can see tool calls refused when a
PreToolUsehook doesnât finish, for example after a timeout - Unavailable features: you canât use Remote Control, Claude in Chrome, or computer use
- Moving the session: you canât move the session to the Desktop app or turn it into a background session, and
/forkcanât start a background copy
Requirements
- Version: Claude Code v2.1.323 or later, on either release channel. An older version starts without Code Mode, with or without the reason
it isn't open to your account yet - Account: a Claude subscription or Console account. You canât use Code Mode through a gateway, Amazon Bedrock, Claude Platform on AWS, Google Cloudâs Agent Platform, Microsoft Foundry, or Claude Models on Google Cloud (Anthropic managed)
- Organization: your organization doesnât use the HIPAA configuration or zero data retention
- Model: Claude Opus 5.5, Sonnet 5.5, Haiku 5.5, or Fable 5.2
- Surface: an interactive
claudesession in a terminal. Code Mode doesnât work with the VS Code panel, the Desktop app, or cloud sessions - Agent teams: to use Code Mode with agent teams on, you need v2.1.326 or later. Teammates run in Code Mode in the default in-process display mode, and start without it in split panes
- Installation: the native build of Claude Code
- Windows: Git for Windows is installed
DISABLE_TELEMETRY. For the fix for each, see Code Mode doesnât start.
Try Code Mode
Turn on Code Mode, give Claude a task, and look at the code that Claude wrote.1
Check your version
Run
claude --version. If the version is older than v2.1.323, run claude update. If youâre on the stable channel and the update doesnât reach v2.1.323, wait for stable to catch up or switch to latest.2
Start Claude Code with Code Mode on
Set the
CLAUDE_CODE_EXPERIMENTAL_CODE_MODE environment variable to 1. To try Code Mode, set it in your shell. To turn on Code Mode for every new session, set it in your user settings.- macOS, Linux, WSL
- Windows PowerShell
- settings.json
3
Confirm that you want Code Mode
Claude Code asks you to confirm before your first Code Mode session. Select Yes, turn on Code Mode. Claude Code restarts and shows this line near the top of the session:If you see a different line or none, see Code Mode doesnât start.
4
Give Claude a task with many tool calls
In a project you know, send a prompt such as this one:
5
Read the code Claude wrote
Press
Ctrl+O and expand a Code row to see the JavaScript behind the tool calls. Press Ctrl+O again to return to the conversation.Turn off Code Mode
RemoveCLAUDE_CODE_EXPERIMENTAL_CODE_MODE from your shell and from ~/.claude/settings.json, then start a new session. You can also keep the variable and change its value to 0 in either place. With a 0 in one place, Code Mode stays off even if you set 1 in the other.
Block Code Mode for your organization
AddCLAUDE_CODE_EXPERIMENTAL_CODE_MODE with the value 0 to your managed settings so that nobody in your organization can use Code Mode:
0 is in place. You canât turn on Code Mode for your users from managed settings.
Permissions and long-running code
Your permission mode decides how the code that Claude writes is checked and whether you can talk to Claude while the code runs.Permission checks
In auto andbypassPermissions modes, code can run from start to finish without a permission prompt. Some calls still prompt you, such as the actions no mode auto-approves.
Each tool call in the code goes through your deny and ask permission rules and PreToolUse hooks under the toolâs usual name, such as Bash or an MCP toolâs name. Beyond rules and hooks, a classifier reviews the code in auto mode, and you answer prompts in the modes that ask:
- Auto mode: the classifier reviews each piece of code before it runs, not each tool call. It doesnât see values computed at run time, such as a path taken from search output, so keep rules or hooks for calls you must control. You can still be prompted for some calls, such as calls in code that you approved yourself after repeated classifier blocks
- Other permission modes: youâre prompted for each tool call that would prompt you in that mode
PreToolUse hook that allows or blocks shell commands, make it check each part of a command, as Bash rules do. In Code Mode, a git push in a folder named app can reach your hook as cd 'app' && git push.
To check the code itself, write a PreToolUse hook that matches REPL, the tool that runs the code, and read the JavaScript from tool_input.code. To check what the code returns, see Check code output with a hook.
Require approval for a command
To see a prompt for a specific command in auto orbypassPermissions mode, add an ask rule for it. Youâre prompted for the forms of the command that the rule matches. To be prompted for commands that start with git push, save this rule in ~/.claude/settings.json:
git push origin main. You see a prompt for that command.
Approve each piece of code first
To read and approve code before it starts, add anask rule for REPL, the tool that runs the code. Save this rule in ~/.claude/settings.json:
Ctrl+O, expand the Code row, and press Ctrl+O again to return. From the main conversation, you donât see a subagentâs code in that view.
If you approve in auto mode, the code starts even when the classifier would have blocked it, and its project edits and read-only commands run without a prompt. If Claude reports that the code canât start a subagent, remove the rule.
Answer a permission prompt while code runs
To stop the code at a prompt for one of its tool calls, answer No without a comment. These results apply to prompts that arenât labeled as coming from a subagent:- No, or
Esc: the code stops, and changes from calls that already finished stay in place - No, with a comment: the call is refused, and the code can continue with its other calls
Limit shell commands with the sandbox
Your sandbox settings apply to the shell commands that code runs. The JavaScript itself and its file, web, and MCP tool calls run outside the sandbox. To isolate the JavaScript and those calls too, run Claude Code in a container or virtual machine. To keep commands in the sandbox when code requests to run them unsandboxed, turn on strict sandbox mode. In auto mode, the classifier reviews the code that makes the request, and the command has no separate review.Long-running code
While code runs a long build or test, Claude either waits for it or lets it continue in the background:- Waiting: Claude answers after the code finishes, and the code stops after ten minutes. In Manual and
acceptEditsmodes, time you spend at a toolâs permission prompt doesnât count toward the ten minutes. Before v2.1.328, that time counted. - Background: you can keep talking to Claude, and the code can run for up to two hours
bypassPermissions mode. If Claude still waits, check your current mode and how you started the session:
- You switched to another mode: press
Shift+Tabuntil youâre back in the mode you started in - You started in another mode: if auto mode is available to you, exit, then run
claude --continue --permission-mode autowith Code Mode on - Youâre on a version before v2.1.328 and picked the session from the
claude --resumelist: exit, update Claude Code, then run the sameclaude --resumecommand with Code Mode on. To stay on your version, replace--resumewith--continue - You passed tool names to
--tools: start again in auto mode without that flag
Stop code in progress
To stop code while Claude is responding or waiting for the code, pressEsc. To stop background code after Claude finishes responding, run /tasks in the session, select the running task, and press x.
After you stop the code, check /tasks for subagents, shell commands, and MCP calls that the code started and that are still running. To stop one, select it and press x.
Check code output with a hook
To check or redact what the code returns before Claude reads it, write aPostToolUse hook that matches REPL, the tool that runs the code. The same hook runs when background code finishes and when code throws an error.
Read code output in the hook
In yourPostToolUse hook, read the output from tool_response, which has fields such as these:
Redact code output
To hide part of the output, return a changed copy oftool_response as updatedToolOutput, and build the copy this way:
- Change the text: redact
result,stdout,stderr, anderror. Handle aresultthatâs missing ornull, and expecterroronly when the code failed or was stopped - Keep the shape: return
code,stdout, andstderras strings, and returnerroras a string or leave it out. If you break this shape, Claude gets the original output - Remove images and PDFs: if the copy has
imagesordocumentsto hide, set that field to[]
notes.txt result, print this JSON:
@, and check that Claudeâs reply shows your replacement text.
Redact when your hook blocks or hits an error
Return a changed copy oftool_response as updatedToolOutput even when your hook blocks or hits an error:
- Your hook blocks: print the redacted copy in the same JSON as
"decision": "block". Without the copy, Claude still reads the original output - Your hook hits an error: catch the error, and print a copy with placeholder text in the fields that you redact. If the hook crashes, times out, or prints invalid JSON, Claude gets the original output
Move a check from a UserPromptSubmit hook
If you check code output in a UserPromptSubmit hook, move that check to your PostToolUse hook. On v2.1.328 or later, UserPromptSubmit hooks donât receive code output, even when an administrator sets them in managed settings.
Troubleshooting
Code Mode doesnât start
Code Mode (experimental) isn't available near the top of the session means that Claude Code started without Code Mode. The reason follows on the same line, and /status shows it too. Find the reason in this table, make the change, and start a new session. For a reason that isnât listed, check the requirements.
If you see no line about Code Mode, run
claude --version. If your version is older than v2.1.323, update. Then check that CLAUDE_CODE_EXPERIMENTAL_CODE_MODE is 1 in your shell or user settings, and remove any 0 from those and from any --settings file.
Permission prompt with a countdown
In auto mode, if you approve code yourself after repeated classifier blocks, you can be asked about tool calls in that code and in earlier code thatâs still running. With no IDE connected, the prompt can show a countdown:Tool call refused by a hook
If Claude reports a refused tool call, ask it for the error text. These errors mean that yourPreToolUse hook didnât give a decision:
the hook did not finish: your hook timed out, or your agent hook ended without a decision. After a timeout, raise the hookâstimeout. For an agent hook that gives no decision, move the check to acommandhook. You can see this error on calls from code, and on other tool calls after Claude runs code in the sessionthe hook failed: on a call from code, your hook couldnât start, was killed, exited with 126, 127, or a code above 128, or returned an HTTP error or invalid output. Fix the hook. You can see this error before v2.1.329. On later versions itâs rare: one cause is feature-flag fetching turning off during a session, after Claude has run code
the hook did not finish. To choose whether the call runs, use a command or http hook and set onFailure on it:
- To stop the call after a timeout or failure: set
"onFailure": "block". Do this for a hook that guards calls - To let the call run after a timeout or failure: set
"onFailure": "continue"
Code output withheld by a hook
If you expected output from code and seeUserPromptSubmit operation blocked by hook in Claudeâs reply, your UserPromptSubmit hook received the output as a prompt and blocked it. If Claude reports only the hookâs reason, ask it to quote the message it received.
On v2.1.328 or later, UserPromptSubmit hooks donât receive code output. To let the output through on an earlier version, update Claude Code or change the hook:
- Update: if you rely on the hook to check code output, first move the check to a
PostToolUsehook. Then update Claude Code to v2.1.328 or later - Stay on your version: change the hook so that it doesnât block when
sourcein its input ispoll_event
Related resources
- Permission modes: compare auto mode with the modes that prompt you
- Hooks reference: write
PreToolUseandPostToolUsehooks - Managed settings: apply one configuration across an organization