Jump to content

File:OH-128.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia
    Original file (SVG file, nominally 2,880 × 2,304 pixels, file size: 5 KB)

    Summary

    Description 750 mm by 600 mm (30 in by 24 in) Ohio State Route shield, made to the specifications existing photos found on [Dan Garnell’s http://www.state-ends.com/ohio/ Ohio Highway Ends]. Uses the Roadgeek 2005 fonts. (United States law does not permit the copyrighting of typeface designs, and the fonts are meant to be copies of a U.S. Government-produced work anyway.)
    Date
    Source Own work
    Author Homefryes
    Permission
    (Reusing this file)    		 Public Domain

    Licensing

    Public domain This file is in the public domain because it comes from the Ohio Supplement to the Manual on Uniform Traffic Control Devices or the Ohio Manual of Uniform Traffic Control Devices (OMUTCD), sign number M1-5. The supplement states on page OH-ii that:
    The Ohio Supplement does not conflict or contravene the Federal MUTCD in accordance with 23 CFR 655.603.
    If a Section, Table, or Figure from the MUTCD is not contained within this Supplement, the section in the Federal MUTCD shall remain unchanged.

    The federal MUTCD states specifically on page 9 that:

    Traffic control device design or application provisions contained in this Manual shall be in the public domain. Traffic control devices contained in this Manual shall not be protected by a patent, trademark, or copyright, except for the Interstate Shield, 511 Travel Information pictograph, National Scenic Byway graphic, and any items under the stewardship of or owned by FHWA.

    The OMUTCD states specifically in its introduction, on page I-1, that:

    Any traffic control device design or application provision contained in this Manual shall be considered to be in the public domain. Traffic control devices contained in this Manual shall not be protected by a patent, trademark, or copyright, except for the Interstate Shield and any items owned by FHWA.

    Captions

    Add a one-line explanation of what this file represents

    Items portrayed in this file

    depicts

    inception

    11 August 2006

    File history

    Click on a date/time to view the file as it appeared at that time.

    Date/TimeThumbnailDimensionsUserComment
    current04:00, 8 May 2025Thumbnail for version as of 04:00, 8 May 20252,880 × 2,304 (5 KB)HWY Shield Bot== {{int:filedesc}} == {{Information |Description={{en|1=Ohio state highway shield}} |Source=File:Ohio 2d template.svg |Date={{subst:VI-time}} |Author=Template: {{user|Scott5114}}<br />File created & uploaded by {{user|Highway Route Marker Bot}} |Permission= |other_versions= }} == {{int:license-header}} == {{PD-MUTCD-OH|M1-5}} 128
    18:09, 23 June 2012Thumbnail for version as of 18:09, 23 June 2012750 × 600 (6 KB)Highway Route Marker BotUpdate per User:Highway Route Marker Bot/Requests#Ohio state route markers using File:Ohio 3d template.svg.
    13:45, 19 August 2006Thumbnail for version as of 13:45, 19 August 2006750 × 600 (11 KB)Homefryes== Summary == {{Information |Description=750 mm by 600 mm (30 in by 24 in) Ohio State Route shield, made to the specifications existing photos found on [Dan Garnell’s http://www.state-ends.com/ohio/ Ohio Highway Ends]. Uses the [http://www.triskele.com/

    Global file usage

    The following other wikis use this file:

    Metadata

    This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

    If the file has been modified from its original state, some details may not fully reflect the modified file.

    Retrieved from "https://en.wikipedia.org/wiki/File:OH-128.svg"