Memo: Petroleum-Derived Products and Materials: An Overview
Petroleum-Derived Products and Materials: An Overview
While petroleum is strongly associated with its use as "fuel," it is actually widely used as a fundamental material in modern industry and daily life. The following systematic overview outlines its uses.
Basic Structure of the Refining Process
When crude oil is distilled and separated, the following fractions are obtained due to differences in boiling points:
Fraction Main Use LPG (Liquefied Petroleum Gas) Household fuel/chemical raw material Naphtha Basic raw material for petrochemicals Gasoline Automotive fuel Kerosene Heating/aviation fuel Diesel fuel Heavy oil Marine/power generation fuel Asphalt Road paving
Of these, naphtha is particularly important as the starting point for petrochemical products.
Basic Substances of Petrochemicals (Basic Chemicals)
The following "basic chemicals" are produced when naphtha is decomposed and reformed.
Ethylene-based
Ethylene → Polyethylene, ethylene glycol, PVC (vinyl chloride)
Propylene → Polypropylene, acrylic materials
Butadiene → Synthetic rubber (SBR, NBR)
Aromatic compounds (BTX)
Benzene → Phenol, nylon raw material (adipic acid), synthetic fibers
Toluene → Paint solvent, TNT explosive, urethane raw material (TDI)
Xylene → PET resin raw material (terephthalic acid), polyester fibers
Plastics and Resins
This category accounts for the largest volume among petrochemical products.
Materials and Examples of Use: Polyethylene (PE) - Shopping bags, wraps, pipes, containers; Polypropylene (PP) - Food containers, automotive parts, nonwoven fabrics; Polystyrene (PS) - Styrofoam, food trays; PVC (Polyvinyl Chloride) - Wire insulation, flooring, water pipes, window frames; PET - PET bottles, films, fibers; Polycarbonate (PC) - Optical lenses, CDs/DVDs, helmets; Nylon (PA) - Toothbrushes, fishing lines, engine parts; Epoxy Resin - Adhesives, semiconductor encapsulants, CFRP base materials; ABS Resin - Home appliance casings, LEGO, automotive interiors; PTFE (Teflon) - Frying pan coatings, semiconductor piping
4. Synthetic Fibers and Rubber
Synthetic Fibers
Polyester (PET-based): Clothing, carpets, seat belts
Nylon: Stockings, umbrellas, ropes, airbags
Acrylic: Knitted clothing, blankets
Polypropylene Fiber: Nonwoven masks, agricultural sheets
Synthetic Rubber
SBR (Styrene-Butadiene Rubber): Main material for tires
NBR (Nitrile Rubber): Oil-resistant gloves, oil seals
EPDM: Automotive door seals, roofing materials
Silicone rubber (partially petroleum-derived): Medical devices, food products
Paints, Adhesives, and Sealant Materials
Alkyd resin paints: Construction and steel applications
Urethane paints: Automotive, wood finishes
Epoxy paints: Boat bottom coatings, concrete corrosion protection
Acrylic adhesives and sealants: Construction, electronic components
Hot melt adhesives (EVA-based): Cardboard, bookbinding
Agricultural and Food-Related Materials
Pesticides (insecticides and herbicides): Many organic synthetic pesticides are derived from benzene and toluene
Chemical fertilizers: Urea (many derived from natural gas, but some via naphtha)
Agricultural films: Polyethylene mulch, greenhouse materials
Food packaging materials: PET film, PP film
Pharmaceuticals and Medical Supplies
Synthetic pharmaceuticals such as aspirin: Benzene derivatives are used as raw materials
Medical-grade PVC: IV bags, tubing
Syringes and medical instruments (made of polypropylene and polycarbonate)
Surgical gloves (nitrile rubber)
Electronic and semiconductor materials
Photoresist (photosensitive resin): Essential for microfabrication of semiconductor circuits
Epoxy encapsulant: Packaging of IC chips
Flexible substrates (polyimide)
Insulating materials (PE/PVC cable sheathing)
Liquid crystal materials: Most nematic liquid crystals are petrochemical-derived
Building and civil engineering materials
Asphalt: Road paving, waterproofing sheets
Insulation materials (expanded polystyrene, urethane foam)
Rigid PVC pipes: Water and sewage systems, gas pipes
Waterproofing paints and corrosion-resistant coatings
Lubricants and greases
Engine oil: Base oil + synthetic additives
Grease: For bearings and industrial machinery
Cutting oil: For metalworking
Summary: Composition of petroleum uses (conceptual diagram)
Crude oil
├─ Fuel systems (approximately 60%)
│ Gasoline, diesel fuel, heavy oil, aviation fuel, LPG
└─ Materials (approx. 10-15%)
├─ Naphtha → Ethylene, propylene, BTX
│ ├─ Plastics (PE/PP/PVC/PET…)
│ ├─ Synthetic fibers (Polyester, nylon…)
│ ├─ Synthetic rubber (SBR, NBR…)
│ ├─ Paints, adhesives
│ ├─ Agricultural chemicals, pharmaceuticals
│ └─ Electronic materials
└─ Heavy fractions → Asphalt, lubricants
Continued: The Depths of Petroleum-Derived Products and Materials
11. Surfactants, detergents, and hygiene products
Petrochemicals support the foundation of the "washing" industry.
Materials and Products: Petroleum-derived ingredients; Synthetic detergents (clothing and dishes): Alkylbenzene sulfonates (LAS): Benzene-derived; Shampoo and body soap: Sodium lauryl sulfate, polyols; Fabric softeners: Quaternary ammonium salts (petroleum-derived nitrogen compounds); Industrial cleaning agents: Naphtha-based solvents, MEK (methyl ethyl ketone); Disinfectant alcohol: Ethylene → Ethanol (synthesis route); Hand sanitizer gel: Carbomer (acrylic acid polymer) used as a gelling agent
12. Cosmetics and Personal Care
When examining the ingredient list of cosmetics, numerous petroleum-derived ingredients appear.
Mineral oil (liquid paraffin): Base for moisturizing creams and baby oils
Petrolatum (petrolatum): Lip balm, wound medicine, moisturizer
Paraffin wax: Solidifying agent for lipstick, mascara, and creams
Polyethylene glycol (PEG): Widely used as an emulsifier and moisturizing ingredient
Silicones (dimethicone, etc.): Smoothing ingredients in hair care products, makeup base
Acrylic polymers: Film-forming agents in mascara and nail polish
Nylon-12: Provides smoothness to foundations
Note: In Europe, "petroleum-derived mineral oil (MOSH/MOAH)" is being discussed as a risk of accumulation in the body, and pressure to switch to bio-derived alternatives is increasing.
Printing, Inks, Dyes, and Pigments
Printing Inks
Offset Inks: While vegetable oil-based inks are becoming more common, petroleum-based solvents and rosin-modified resins are still used.
Gravure Inks: Naphtha-derived solvents such as toluene and ethyl acetate.
UV Inks: Acrylate monomers (petrochemicals) are the main component.
Inkjet Inks: Glycol ether-based solvents.
Synthetic Dyes and Pigments
Azo Dyes: Synthesized from diazo compounds derived from benzene and toluene. Widely used in clothing and food coloring.
Phthalocyanine Pigments (Blue and Green): Printer inks, automotive paints.
Carbon Black: Manufactured by the incomplete combustion of heavy oil. Tire reinforcement materials, ink blackening agents
Automotive Industry: A Collection of Petroleum-Derived Materials
Estimated amount of petroleum-derived materials used in one modern automobile:
Material composition of one automobile (approximately 1.5 tons) (approximate)
├─ Steel and aluminum: approx. 70%
└─ Petroleum-derived materials: approx. 15-20% (≒225-300kg)
├─ Tires and rubber: approx. 50kg (SBR, carbon black)
├─ Plastic interior and exterior: approx. 100kg (PP, ABS, PC, etc.)
├─ Paints and coatings: approx. 20kg
├─ Sealants and adhesives: approx. 10kg
├─ Fuel tubes and hoses: several kg (NBR, FKM)
└─ Electrical Wire Sheathing and Insulation: Several kg (PVC/PE)
Even with the shift to EVs, tire, interior plastics, paints, and sealants will continue to rely on petroleum-based materials.
Aerospace and Defense Materials
Structural Materials
CFRP (Carbon Fiber Reinforced Plastic): Epoxy resin (petrochemical) is the base material. 50% of the Boeing 787 airframe is CFRP.
GFRP (Glass Fiber Reinforced Plastic): Epoxy/polyester resin base material
Functional Materials
Aircraft Sealing Materials (Polysulfide/Silicone): Maintains airtightness in fuel tanks
Bulletproof Materials: UHMWPE (Ultra-High Molecular Weight Polyethylene), Kevlar (Aramid fiber, petroleum-derived amine)
Solid Rocket Fuel: HTPB (Terminal Hydroxyl Polybutadiene) as the binder
Petroleum Dependence Structure of the Agriculture and Food Industry
Agriculture is an industry that "converts solar energy into food," but modern agriculture cannot exist without petroleum.
Agricultural Materials
Materials: Relationship with Petroleum; Chemical Pesticides (Organochlorine, Organophosphorus, Neonicotinoid – all naphtha derivatives); Agricultural Plastics (Mulch film, greenhouse film, seedling trays (PE/PP), fertilizer bags/feed bags, large flexible containers (PP); Agricultural Machinery Parts (Engine parts, hoses, sealants)
Food Industry
Food-grade Lubricants: Lubrication of food processing machinery (using white mineral oil)
General Food Packaging Materials: OPP film, CPP film, nylon barrier layer
Frozen Food Trays: Foamed PS or PP sheet
PET Bottles & Caps: PET (bottle) + PP (cap)
Details of Construction and Infrastructure Materials
Waterproofing & Corrosion Protection
Modified Asphalt Waterproofing Sheets: Road and rooftop waterproofing
Epoxy-based Corrosion Protection Paints: Bridges, ports, tank interiors
Urethane Waterproofing Materials: Rooftop greening underlayment, parking lot floors
Insulation & Sound Absorption
Rigid Urethane Foam: Exterior wall insulation, refrigerated warehouses
Extruded polystyrene foam (XPS): Underfloor insulation (Styrofoam, etc.)
Flexible polyurethane foam: Interior material for sofas and mattresses
Piping and electrical equipment
Rigid and flexible PVC pipes: Water supply and drainage, cable management
Cross-linked polyethylene (PEX) pipes: Underfloor heating, water supply
Cable insulation and sheathing materials: PE, PVC, XLPE
Petroleum dependence (deep extraction) in the electronics and IT industry
The semiconductor and electronics industry is one of the highest value-added petrochemical consumption industries.
Semiconductor Manufacturing Process
Process: Petroleum-derived materials; Photolithography: Photoresist (acrylic/novolac resin); Cleaning: IPA (isopropanol), NMP (N-methylpyrrolidone); Encapsulation: Epoxy mold compound; Mounting: Flux (rosin-based), underfill resin
Display Materials
Liquid Crystal Display (LCD): Nematic liquid crystal compounds (mostly cyclohexane/phenyl derivatives)
Polarizing Plate: PVA film + TAC (triacetylcellulose) film
OLED Light-Emitting Materials: Organic molecules such as anthracene derivatives (benzene-based skeleton)
Secondary Battery (Li-ion)
Electrolyte Solvent: EC (ethylene carbonate), DMC (dimethyl carbonate) - both petrochemicals
Separator: Microporous membrane of PE/PP
Binder: PVDF (polyvinylidene fluoride)
Cathode Material Slurry Dispersant: NMP solvent
While the spread of EVs will reduce the "fuel demand" for petroleum, the demand for petrochemicals in battery manufacturing will increase. 19. Sports and Outdoor Equipment
High-performance sports equipment is the culmination of petrochemical technology.
Products: Petroleum-derived materials; Running shoes (soles): EVA (ethylene vinyl acetate) foam, thermoplastic polyurethane; Ski wear: Gore-Tex (ePTFE membrane), polyester outer fabric; Tents: Ripstop nylon, silicone-coated polyester
Rope and climbing equipment: UHMWPE (Dyneema), nylon; Bicycle frames (carbon): CFRP epoxy base material; Surfboards: Polyurethane foam core, epoxy sheath; Fishing rods and lines: Carbon/glass FRP, fluorocarbon/PE lines
20. Substitution Trends and Limitations of Petroleum-Derived Materials
Areas where substitution is progressing:
Bioplastics (PLA/PHA): Partial introduction into packaging materials and disposable containers
Recycled PET/Recycled PP: Reused through mechanical recycling
Bio-naphtha: Naphtha derived from waste cooking oil and agricultural residues (existing plants can be used)
Areas where substitution is difficult:
High-performance engineering plastics (PEEK/PEI, etc.): No substitute for heat resistance or mechanical properties
Specialty chemicals for semiconductor manufacturing: Long-term development of alternative material technology is required
CFRP for aerospace: Mechanical properties of bio-derived epoxy are still insufficient
Medical-grade PVC and Silicone: Re-certification of Biocompatibility is a Barrier
Overall Overview: Why is "De-petroleum" Difficult?
Two Faces of Petroleum
┌─────────────────────────────────────┐
│ ① Energy Source (Fuel) │
│ → Can be replaced by renewable energy and EVs │
│ → Target for reduction in net-zero emissions by 2050 │
├─────────────────────────────────────┤
│ ② Raw Materials (Petrochemicals) │
│ → Extremely difficult to replace │
│ → Often overlooked in decarbonization discussions │
│ → The contradiction: Demand for petrochemicals increases due to EV and renewable energy equipment manufacturing │
│ │
└───────────────────────────────────────┘
While the "fuel component" of petroleum demand will shrink in the long term, the "raw material component" will actually become more sophisticated and diversified along with technological innovation and industrial advancement. This is why the petrochemical industry cannot simply be called a "declining industry."
Sequel ②: Further Depth of Petroleum-Derived Products and Materials
21. Structure and Competitiveness of Japan's Petrochemical Industry
Basic Industrial Structure
Crude Oil Imports (Approximately 90% Dependent on the Middle East)
↓
Refineries (Refining)
↓
Naphtha Extraction and Distribution
↓
Petrochemical Complexes (Ethylene Centers)
↓
Derivative Product Manufacturers (Resins, Fibers, Paints, etc.)
↓
Processing and Molding Manufacturers
↓
Final Products
Major Petrochemical Complexes and Locations in Japan
Region Major Hub Characteristics Chiba Keiyo Industrial Zone Largest in Japan, Mitsui Chemicals, Sumitomo Chemical, Tosoh Kawasaki/Yokohama Keihin Industrial Zone ENEOS, Showa Denko, Asahi Kasei Osaka/Sakai Hanshin Industrial Zone Sumitomo Chemical, Osaka Soda Okayama/Kurashiki Mizushima Complex Mitsubishi Chemical, Asahi Kasei Yamaguchi/Shunan Tokuyama Complex Idemitsu, Tosoh, Tokuyama Oita Oita Complex Showa Denko (now Resonac)
Current Status and Challenges of Competitiveness
Strengths
High Quality Stability and Process Technology (Specialty Chemicals)
Global Dominance in Semiconductor and Electronic Materials (JSR, Shin-Etsu Chemical, Sumitomo Chemical)
Integrated Industrial Cluster from Materials to Processing
Weaknesses and Structural Issues
Excessive and Aging Ethylene Facilities (Average Operating Rate Below Global Standards)
Losing Cost in General Purpose Products Compared to Large, State-of-the-Art Plants in China and South Korea
High Naphtha Raw Material Costs (Middle East and the US Have an Advantage in Ethane Raw Materials)
Struggling with Both Shrinking Domestic Demand (Population Decline) and Losing Export Competitiveness
Major Companies such as Mitsubishi Chemical, Sumitomo Chemical, and Asahi Kasei have made "Shifting from General Purpose Products to High-Performance Products" the Core of Their Management Policies, but the Speed and Depth of This Transformation are Being Questioned.
Naphtha Procurement and Geopolitical Risks
Japan's Naphtha Procurement Structure
Japan Imports Almost All of its Crude Oil and Refines Naphtha at Domestic Refineries. Approximately 90% of crude oil imports are concentrated in the Middle East (Saudi Arabia, UAE, Kuwait, Qatar, etc.). Risks in the Strait of Hormuz
Middle Eastern Oil-Producing Countries
↓
Strait of Hormuz (approx. 55 km wide)
↓ ← This is the only exit
Tanker Route
↓
Arrival in Japan (approx. 20 days)
Approximately 80% of Japan's oil imports pass through the Strait of Hormuz.
If a closure or conflict occurs, Japan's petrochemical industry would be forced to halt production within weeks to months.
National reserves (approx. 145 days' worth) are mainly for fuel; naphtha reserves for petrochemicals are managed separately.
Reality of Alternative Procurement
Alternative Routes Challenges US (WTI series) Shale oil origin, low naphtha yield Russian Sanctions risk, Sakhalin interests issue Southeast Asia Limited quantity Canada/Australia High transportation costs, insufficient quantity
Conclusion: The geopolitical vulnerability of Japan's petrochemical industry is being re-recognized as a material security issue alongside energy security.
Petrochemicals and the "Invisible Dependence" in Supply Chains
The COVID-19 pandemic in 2021 and the Russia-Ukraine War in 2022 revealed the fact that petrochemicals are an "invisible dependency" at the very top of industrial supply chains.
Specific Chain Examples
① Resin Shortage Behind Semiconductor Shortages
Naphtha → Epoxy Resin → Semiconductor Encapsulation
↓
Inability to Manufacture Automotive ECUs and Home Appliance Chips
② Petrochemical Dependence in Medical Supplies
Naphtha → PVC → IV Bags, Blood Bags, Tubing
→ PP → Syringes, Medical Trays
→ NBR → Medical Gloves (Global Shortage Due to COVID-19)
③ Impact on the Food Supply Chain
Naphtha → PE/PP → Shortage of Food Packaging Film
→ Shortage of Agricultural Mulch Film
→ Shortage of Food Trays
↓
Disruption to Food Distribution and Freshness Management
"Upstream Concentration of Materials" Risk
The production of specialty chemicals and electronic materials worldwide is highly concentrated in a few companies and regions.
Product Categories: Top Global Market Shares Photoresists: JSR, Shin-Etsu Chemical, TOK (Japan's three companies account for over 90% of the world market) Hydrogen Fluoride (High Purity): Stella Chemifa, Morita Chemical (Japan holds a monopoly) PVDF (For Batteries): Arkema (France), Solvay (Belgium), Kureha (Japan) Epoxy Resin Substrates: Major suppliers are Japanese and Taiwanese manufacturers
24. Price Structure and Market Conditions of Petrochemicals
Cost Composition
The price of petrochemicals is largely determined by three factors:
Product Price = Naphtha Price + Conversion Costs + Margin
(Variable Costs) (Fixed Costs + Energy) (Depending on market conditions)
Linkage between Naphtha Price and Petrochemical Price
Naphtha price is almost directly linked to crude oil price (correlation coefficient of 0.9 or higher)
If crude oil fluctuates by $10/barrel, naphtha fluctuates by approximately $70-80/ton
This is passed on to the prices of general-purpose products such as polyethylene and polypropylene.
Spread (Profitability Indicator)
In the petrochemical industry, the "ethylene spread" (ethylene price - naphtha price) is considered an important profitability indicator.
Spread Level Industry Situation $500/ton or more High profitability (investment/increased production phase) $300-500/ton Average $300/ton or less Deteriorating profitability/consideration of facility shutdown
In 2022-2023, the combination of stagnant demand in China and increased new supply from the Middle East and the US resulted in widespread deterioration of profitability for Japanese petrochemical manufacturers.
The "Paradox" of the EV/Renewable Energy Revolution and Petrochemical Demand
This section outlines areas where decarbonization may not reduce, but rather boost, the demand for petrochemicals.
Petrochemicals Required for EV Batteries (for one passenger car)
Materials Petrochemicals Usage (approximate) Electrolyte Solvent EC/DMC/EMC Approx. 1-2 kg Separator PE/PP Microporous Membrane Approx. 1-2 m² Binder PVDF/SBR Several hundred g Electrolyte Solvent NMP Large amount used during manufacturing Outer Laminate Aluminum Laminate Film (PA/PP layer) Several hundred g Insulation/Vibration Isolator Polyurethane Foam Several kg
Petrochemicals Required for Solar Panels (1 MW system)
Sealing Material: EVA (Ethylene Vinyl Acetate) Film → Approx. 3-4 tons
Backsheet: PET/Fluoropolymer Composite Film
Frame Adhesive: Silicone/Polyurethane
Cable Sheath: Cross-linked Polyethylene (XLPE)
Offshore Wind Power Generation
Blades: Epoxy Resin + Glass Fiber/Carbon Fiber (GFRP/CFRP)
Epoxy Resin Used for Blades of One Offshore Wind Turbine: Approx. 20-30 tons
Submarine Cables: XLPE Insulation, PE Sheath
Estimate: Some estimates suggest that the cumulative demand for petrochemicals (resins, fibers, paints, etc.) will reach several times the current level just from the manufacturing of wind and solar power equipment necessary to achieve the 2050 net-zero scenario.
The Reality of Bio-Based and Recycled Chemicals
Current Status of Bioplastics (as of 2024)
Type Raw Material Characteristics Challenges PLA (Polylactic Acid) Corn/Sugarcane Biodegradable, Transparency Low heat resistance, High cost PHA Microbial fermentation Completely biodegradable Manufacturing cost 5-10 times higher than petroleum-based BioPET Plant-derived ethylene glycol Can utilize existing equipment Same physical properties as petroleum-based BioPE Sugarcane-derived ethanol Commercialized by Braschem (Brazil) Farmland competition problem
Reality: Global production of bioplastics is less than 1% of total plastic production (2024). A triple wall of performance, cost, and scale stands in the way.
Potential and Limitations of Chemical Recycling
Waste Plastics
↓ Pyrolysis (500-700°C)
Pyrolysis Oil (Naphtha Equivalent)
↓
Reuse in Existing Petrochemical Plants
↓
"Fossil Resource-Free" Plastics
Technically, this is becoming established.
Challenges: Sorting and collection costs, quality stability of mixed waste plastics, energy efficiency (output ratio to input)
In Japan, Mitsubishi Chemical, ENEOS, and others are moving towards commercialization.
Toxicity and Environmental Issues of Petrochemicals
Microplastic Problem
An estimated 150-500 million tons of plastic exist in the world's oceans.
"Microplastics (5mm or less)" broken down by ultraviolet rays and waves accumulate in ecosystems.
Effects on the Human Body: Detection in blood, lungs, and placenta has been reported repeatedly.
Regulatory Trends: EU "Single-Use Plastics Directive," Japan "Plastic Resource Recycling Promotion Law" (enacted in 2022)
Endocrine Disruptor Problem
Substance Use Problem Bisphenol A (BPA) Epoxy resins and polycarbonates: Endocrine-disrupting effects, stricter EU regulations. Phthalate esters and PVC plasticizers: Suspected reproductive toxicity, REACH regulations. PFAS (fluorinated compounds): Water-repellent coatings and foams, etc. "Eternal chemicals," accumulating without decomposition.
VOC (Volatile Organic Compound) problem
Toluene, xylene, MEK, etc. contained in paints, adhesives, and cleaning agents volatilize.
They react with NOx in the atmosphere, generating photochemical smog.
In Japan, the shift to water-based paints and low-VOC products is progressing due to "VOC emission regulations."
The Future of Petrochemicals: Structural Change Scenarios for 2030-2050
Scenario A: Status Quo/Gradual Transformation
General-purpose products (PE, PP, PVC) continue to grow due to demand in emerging countries.
In developed countries, the shift to high-performance products and specialty chemicals accelerates.
China's excess capacity will put long-term pressure on the global market.
Scenario B: Accelerated Transformation (Strengthened Carbon Pricing)
Rising CO₂ emission costs lead to a significant increase in petrochemical manufacturing costs.
Bio-naphtha and chemically recycled products begin to gain competitiveness.
Increased investment in ethylene plants with CCS (carbon capture and storage).
Scenario C: Material security
The Era
A Return to "Domestic Materials and Production" from the Perspective of Geopolitical Risk and Economic Security
Domestic Procurement and Stockpiling of Strategic Materials Becomes a Policy Issue in Japan and Europe
Semiconductor Materials, Battery Materials, and Defense Materials Receive Preferential Treatment as "Economic Security Designated Items"
Summary: Reading Petrochemicals as "The Geopolitics of Materials"
[20th Century View of Petroleum]
Petroleum = Symbol of Energy Hegemony
Conflict Structure: Oil-Producing Countries vs. Consumer Countries
[21st Century View of Petrochemicals]
Naphtha and Petrochemicals = Foundation of Industrial and Technological Hegemony
Who Can Secure Naphtha Cheaply and in Large Quantities?
↓
Who Can Manufacture High-Performance Materials?
↓
Who Can Dominate the Semiconductor, EV, Aerospace, and Defense Industries?
↓
Who Will Seize Industrial Hegemony in the 21st Century
Petroleum is not merely fuel; it is the very material infrastructure of modern civilization. While attention to petroleum as an energy source is increasing in the context of "decarbonization," the strategic importance of petrochemicals as materials is expected to increase even further in the future.