Family `ethtool` netlink specification ¶

Operations ¶

strset-get ¶

Get string set from the kernel.

attribute-set:

strset

do:

request

attributes:: [header, stringsets, counts-only]

reply

attributes:: [header, stringsets]

dump:

request

attributes:: [header, stringsets, counts-only]

reply

attributes:: [header, stringsets]

linkinfo-get ¶

Get link info.

attribute-set:

linkinfo

do:

request

attributes:: [header]

reply

attributes:: [header, port, phyaddr, tp-mdix, tp-mdix-ctrl, transceiver]

dump:

request

attributes:: [header]

reply

attributes:: [header, port, phyaddr, tp-mdix, tp-mdix-ctrl, transceiver]

linkinfo-set ¶

Set link info.

attribute-set:

linkinfo

do:

request

attributes:: [header, port, phyaddr, tp-mdix, tp-mdix-ctrl, transceiver]

linkinfo-ntf ¶

Notification for change in link info.

notify:: linkinfo-get

linkmodes-get ¶

Get link modes.

attribute-set:

linkmodes

do:

request

attributes:: [header]

reply

attributes:: [header, autoneg, ours, peer, speed, duplex, master-slave-cfg, master-slave-state, lanes, rate-matching]

dump:

request

attributes:: [header]

reply

attributes:: [header, autoneg, ours, peer, speed, duplex, master-slave-cfg, master-slave-state, lanes, rate-matching]

linkmodes-set ¶

Set link modes.

attribute-set:

linkmodes

do:

request

attributes:: [header, autoneg, ours, peer, speed, duplex, master-slave-cfg, master-slave-state, lanes, rate-matching]

linkmodes-ntf ¶

Notification for change in link modes.

notify:: linkmodes-get

linkstate-get ¶

Get link state.

attribute-set:

linkstate

do:

request

attributes:: [header]

reply

attributes:: [header, link, sqi, sqi-max, ext-state, ext-substate, ext-down-cnt]

dump:

request

attributes:: [header]

reply

attributes:: [header, link, sqi, sqi-max, ext-state, ext-substate, ext-down-cnt]

debug-get ¶

Get debug message mask.

attribute-set:

debug

do:

request

attributes:: [header]

reply

attributes:: [header, msgmask]

dump:

request

attributes:: [header]

reply

attributes:: [header, msgmask]

debug-set ¶

Set debug message mask.

attribute-set:

debug

do:

request

attributes:: [header, msgmask]

debug-ntf ¶

Notification for change in debug message mask.

notify:: debug-get

wol-get ¶

Get WOL params.

attribute-set:

wol

do:

request

attributes:: [header]

reply

attributes:: [header, modes, sopass]

dump:

request

attributes:: [header]

reply

attributes:: [header, modes, sopass]

wol-set ¶

Set WOL params.

attribute-set:

wol

do:

request

attributes:: [header, modes, sopass]

wol-ntf ¶

Notification for change in WOL params.

notify:: wol-get

features-get ¶

Get features.

attribute-set:

features

do:

request

attributes:: [header]

reply

attributes:: [header, hw, wanted, active, nochange]

dump:

request

attributes:: [header]

reply

attributes:: [header, hw, wanted, active, nochange]

features-set ¶

Set features.

attribute-set:

features

do:

request

attributes:: [header, hw, wanted, active, nochange]

reply

attributes:: [header, hw, wanted, active, nochange]

features-ntf ¶

Notification for change in features.

notify:: features-get

privflags-get ¶

Get device private flags.

attribute-set:

privflags

do:

request

attributes:: [header]

reply

attributes:: [header, flags]

dump:

request

attributes:: [header]

reply

attributes:: [header, flags]

privflags-set ¶

Set device private flags.

attribute-set:

privflags

do:

request

attributes:: [header, flags]

privflags-ntf ¶

Notification for change in device private flags.

notify:: privflags-get

rings-get ¶

Get ring params.

attribute-set:

rings

do:

request

attributes:: [header]

reply

attributes:: [header, rx-max, rx-mini-max, rx-jumbo-max, tx-max, rx, rx-mini, rx-jumbo, tx, rx-buf-len, tcp-data-split, cqe-size, tx-push, rx-push, tx-push-buf-len, tx-push-buf-len-max, hds-thresh, hds-thresh-max]

dump:

request

attributes:: [header]

reply

attributes:: [header, rx-max, rx-mini-max, rx-jumbo-max, tx-max, rx, rx-mini, rx-jumbo, tx, rx-buf-len, tcp-data-split, cqe-size, tx-push, rx-push, tx-push-buf-len, tx-push-buf-len-max, hds-thresh, hds-thresh-max]

rings-set ¶

Set ring params.

attribute-set:

rings

do:

request

attributes:: [header, rx-max, rx-mini-max, rx-jumbo-max, tx-max, rx, rx-mini, rx-jumbo, tx, rx-buf-len, tcp-data-split, cqe-size, tx-push, rx-push, tx-push-buf-len, tx-push-buf-len-max, hds-thresh, hds-thresh-max]

rings-ntf ¶

Notification for change in ring params.

notify:: rings-get

channels-get ¶

Get channel params.

attribute-set:

channels

do:

request

attributes:: [header]

reply

attributes:: [header, rx-max, tx-max, other-max, combined-max, rx-count, tx-count, other-count, combined-count]

dump:

request

attributes:: [header]

reply

attributes:: [header, rx-max, tx-max, other-max, combined-max, rx-count, tx-count, other-count, combined-count]

channels-set ¶

Set channel params.

attribute-set:

channels

do:

request

attributes:: [header, rx-max, tx-max, other-max, combined-max, rx-count, tx-count, other-count, combined-count]

channels-ntf ¶

Notification for change in channel params.

notify:: channels-get

coalesce-get ¶

Get coalesce params.

attribute-set:

coalesce

do:

request

attributes:: [header]

reply

attributes:: [header, rx-usecs, rx-max-frames, rx-usecs-irq, rx-max-frames-irq, tx-usecs, tx-max-frames, tx-usecs-irq, tx-max-frames-irq, stats-block-usecs, use-adaptive-rx, use-adaptive-tx, pkt-rate-low, rx-usecs-low, rx-max-frames-low, tx-usecs-low, tx-max-frames-low, pkt-rate-high, rx-usecs-high, rx-max-frames-high, tx-usecs-high, tx-max-frames-high, rate-sample-interval, use-cqe-mode-tx, use-cqe-mode-rx, tx-aggr-max-bytes, tx-aggr-max-frames, tx-aggr-time-usecs, rx-profile, tx-profile, rx-cqe-frames, rx-cqe-nsecs]

dump:

request

attributes:: [header]

reply

attributes:: [header, rx-usecs, rx-max-frames, rx-usecs-irq, rx-max-frames-irq, tx-usecs, tx-max-frames, tx-usecs-irq, tx-max-frames-irq, stats-block-usecs, use-adaptive-rx, use-adaptive-tx, pkt-rate-low, rx-usecs-low, rx-max-frames-low, tx-usecs-low, tx-max-frames-low, pkt-rate-high, rx-usecs-high, rx-max-frames-high, tx-usecs-high, tx-max-frames-high, rate-sample-interval, use-cqe-mode-tx, use-cqe-mode-rx, tx-aggr-max-bytes, tx-aggr-max-frames, tx-aggr-time-usecs, rx-profile, tx-profile, rx-cqe-frames, rx-cqe-nsecs]

coalesce-set ¶

Set coalesce params.

attribute-set:

coalesce

do:

request

attributes:: [header, rx-usecs, rx-max-frames, rx-usecs-irq, rx-max-frames-irq, tx-usecs, tx-max-frames, tx-usecs-irq, tx-max-frames-irq, stats-block-usecs, use-adaptive-rx, use-adaptive-tx, pkt-rate-low, rx-usecs-low, rx-max-frames-low, tx-usecs-low, tx-max-frames-low, pkt-rate-high, rx-usecs-high, rx-max-frames-high, tx-usecs-high, tx-max-frames-high, rate-sample-interval, use-cqe-mode-tx, use-cqe-mode-rx, tx-aggr-max-bytes, tx-aggr-max-frames, tx-aggr-time-usecs, rx-profile, tx-profile, rx-cqe-frames, rx-cqe-nsecs]

coalesce-ntf ¶

Notification for change in coalesce params.

notify:: coalesce-get

pause-get ¶

Get pause params.

attribute-set:

pause

do:

request

attributes:: [header]

reply

attributes:: [header, autoneg, rx, tx, stats, stats-src]

dump:

request

attributes:: [header]

reply

attributes:: [header, autoneg, rx, tx, stats, stats-src]

pause-set ¶

Set pause params.

attribute-set:

pause

do:

request

attributes:: [header, autoneg, rx, tx, stats, stats-src]

pause-ntf ¶

Notification for change in pause params.

notify:: pause-get

eee-get ¶

Get eee params.

attribute-set:

eee

do:

request

attributes:: [header]

reply

attributes:: [header, modes-ours, modes-peer, active, enabled, tx-lpi-enabled, tx-lpi-timer]

dump:

request

attributes:: [header]

reply

attributes:: [header, modes-ours, modes-peer, active, enabled, tx-lpi-enabled, tx-lpi-timer]

eee-set ¶

Set eee params.

attribute-set:

eee

do:

request

attributes:: [header, modes-ours, modes-peer, active, enabled, tx-lpi-enabled, tx-lpi-timer]

eee-ntf ¶

Notification for change in eee params.

notify:: eee-get

tsinfo-get ¶

Get tsinfo params.

attribute-set:

tsinfo

do:

request

attributes:: [header, hwtstamp-provider]

reply

attributes:: [header, timestamping, tx-types, rx-filters, phc-index, stats, hwtstamp-provider, hwtstamp-source, hwtstamp-phyindex]

dump:

request

attributes:: [header, hwtstamp-provider]

reply

attributes:: [header, timestamping, tx-types, rx-filters, phc-index, stats, hwtstamp-provider, hwtstamp-source, hwtstamp-phyindex]

cable-test-act ¶

Cable test.

attribute-set:

cable-test

do:

request

attributes:: [header]

cable-test-ntf ¶

Cable test notification.

attribute-set:

cable-test-ntf

event:

attributes:: [header, status]

cable-test-tdr-act ¶

Cable test TDR.

attribute-set:

cable-test-tdr

do:

request

attributes:: [header]

cable-test-tdr-ntf ¶

Cable test TDR notification.

attribute-set:

cable-test-tdr-ntf

event:

attributes:: [header, status, nest]

tunnel-info-get ¶

Get tsinfo params.

attribute-set:

tunnel-info

do:

request

attributes:: [header]

reply

attributes:: [header, udp-ports]

dump:

request

attributes:: [header]

reply

attributes:: [header, udp-ports]

fec-get ¶

Get FEC params.

attribute-set:

fec

do:

request

attributes:: [header]

reply

attributes:: [header, modes, auto, active, stats]

dump:

request

attributes:: [header]

reply

attributes:: [header, modes, auto, active, stats]

fec-set ¶

Set FEC params.

attribute-set:

fec

do:

request

attributes:: [header, modes, auto, active, stats]

fec-ntf ¶

Notification for change in FEC params.

notify:: fec-get

module-eeprom-get ¶

Get module EEPROM params.

attribute-set:

module-eeprom

do:

request

attributes:: [header, offset, length, page, bank, i2c-address]

reply

attributes:: [header, data]

dump:

request

attributes:: [header, offset, length, page, bank, i2c-address]

reply

attributes:: [header, data]

stats-get ¶

Get statistics.

attribute-set:

stats

do:

request

attributes:: [header, groups]

reply

attributes:: [header, groups, grp, src]

dump:

request

attributes:: [header, groups]

reply

attributes:: [header, groups, grp, src]

phc-vclocks-get ¶

Get PHC VCLOCKs.

attribute-set:

phc-vclocks

do:

request

attributes:: [header]

reply

attributes:: [header, num]

dump:

request

attributes:: [header]

reply

attributes:: [header, num]

module-get ¶

Get module params.

attribute-set:

module

do:

request

attributes:: [header]

reply

attributes:: [header, power-mode-policy, power-mode]

dump:

request

attributes:: [header]

reply

attributes:: [header, power-mode-policy, power-mode]

module-set ¶

Set module params.

attribute-set:

module

do:

request

attributes:: [header, power-mode-policy, power-mode]

module-ntf ¶

Notification for change in module params.

notify:: module-get

pse-get ¶

Get Power Sourcing Equipment params.

attribute-set:

pse

do:

request

attributes:: [header]

reply

attributes:: [header, podl-pse-admin-state, podl-pse-admin-control, podl-pse-pw-d-status, c33-pse-admin-state, c33-pse-admin-control, c33-pse-pw-d-status, c33-pse-pw-class, c33-pse-actual-pw, c33-pse-ext-state, c33-pse-ext-substate, c33-pse-avail-pw-limit, c33-pse-pw-limit-ranges, pse-pw-d-id, pse-prio-max, pse-prio]

dump:

request

attributes:: [header]

reply

attributes:: [header, podl-pse-admin-state, podl-pse-admin-control, podl-pse-pw-d-status, c33-pse-admin-state, c33-pse-admin-control, c33-pse-pw-d-status, c33-pse-pw-class, c33-pse-actual-pw, c33-pse-ext-state, c33-pse-ext-substate, c33-pse-avail-pw-limit, c33-pse-pw-limit-ranges, pse-pw-d-id, pse-prio-max, pse-prio]

pse-set ¶

Set Power Sourcing Equipment params.

attribute-set:

pse

do:

request

attributes:: [header, podl-pse-admin-control, c33-pse-admin-control, c33-pse-avail-pw-limit, pse-prio]

rss-get ¶

Get RSS params.

attribute-set:

rss

do:

request

attributes:: [header, context]

reply

attributes:: [header, context, hfunc, indir, hkey, input-xfrm, flow-hash]

dump:

request

attributes:: [header, start-context]

reply

attributes:: [header, context, hfunc, indir, hkey, input-xfrm, flow-hash]

plca-get-cfg ¶

Get PLCA params.

attribute-set:

plca

do:

request

attributes:: [header]

reply

attributes:: [header, version, enabled, status, node-cnt, node-id, to-tmr, burst-cnt, burst-tmr]

dump:

request

attributes:: [header]

reply

attributes:: [header, version, enabled, status, node-cnt, node-id, to-tmr, burst-cnt, burst-tmr]

plca-set-cfg ¶

Set PLCA params.

attribute-set:

plca

do:

request

attributes:: [header, version, enabled, status, node-cnt, node-id, to-tmr, burst-cnt, burst-tmr]

plca-get-status ¶

Get PLCA status params.

attribute-set:

plca

do:

request

attributes:: [header]

reply

attributes:: [header, version, enabled, status, node-cnt, node-id, to-tmr, burst-cnt, burst-tmr]

dump:

request

attributes:: [header]

reply

attributes:: [header, version, enabled, status, node-cnt, node-id, to-tmr, burst-cnt, burst-tmr]

plca-ntf ¶

Notification for change in PLCA params.

notify:: plca-get-cfg

mm-get ¶

Get MAC Merge configuration and state

attribute-set:

mm

do:

request

attributes:: [header]

reply

attributes:: [header, pmac-enabled, tx-enabled, tx-active, tx-min-frag-size, rx-min-frag-size, verify-enabled, verify-time, max-verify-time, stats]

dump:

request

attributes:: [header]

reply

attributes:: [header, pmac-enabled, tx-enabled, tx-active, tx-min-frag-size, rx-min-frag-size, verify-enabled, verify-time, max-verify-time, stats]

mm-set ¶

Set MAC Merge configuration

attribute-set:

mm

do:

request

attributes:: [header, verify-enabled, verify-time, tx-enabled, pmac-enabled, tx-min-frag-size]

mm-ntf ¶

Notification for change in MAC Merge configuration.

notify:: mm-get

module-fw-flash-act ¶

Flash transceiver module firmware.

attribute-set:

module-fw-flash

do:

request

attributes:: [header, file-name, password]

module-fw-flash-ntf ¶

Notification for firmware flashing progress and status.

attribute-set:

module-fw-flash

event:

attributes:: [header, status, status-msg, done, total]

phy-get ¶

Get PHY devices attached to an interface

attribute-set:

phy

do:

request

attributes:: [header]

reply

attributes:: [header, index, drvname, name, upstream-type, upstream-index, upstream-sfp-name, downstream-sfp-name]

dump:

request

attributes:: [header]

reply

attributes:: [header, index, drvname, name, upstream-type, upstream-index, upstream-sfp-name, downstream-sfp-name]

phy-ntf ¶

Notification for change in PHY devices.

notify:: phy-get

tsconfig-get ¶

Get hwtstamp config.

attribute-set:

tsconfig

do:

request

attributes:: [header]

reply

attributes:: [header, hwtstamp-provider, tx-types, rx-filters, hwtstamp-flags]

dump:

request

attributes:: [header]

reply

attributes:: [header, hwtstamp-provider, tx-types, rx-filters, hwtstamp-flags]

tsconfig-set ¶

Set hwtstamp config.

attribute-set:

tsconfig

do:

request

attributes:: [header, hwtstamp-provider, tx-types, rx-filters, hwtstamp-flags]

reply

attributes:: [header, hwtstamp-provider, tx-types, rx-filters, hwtstamp-flags]

pse-ntf ¶

Notification for PSE events.

attribute-set:

pse-ntf

event:

attributes:: [header, events]

rss-set ¶

Set RSS params.

attribute-set:

rss

do:

request

attributes:: [header, context, hfunc, indir, hkey, input-xfrm, flow-hash]

rss-ntf ¶

Notification for change in RSS configuration. For additional contexts only modifications use this notification, creation and deletion have dedicated messages.

notify:: rss-get

rss-create-act ¶

Create an RSS context.

attribute-set:

rss

do:

request

attributes:: [header, context, hfunc, indir, hkey, input-xfrm]

reply

attributes:: [header, context, hfunc, indir, hkey, input-xfrm]

rss-create-ntf ¶

Notification for creation of an additional RSS context.

notify:: rss-create-act

rss-delete-act ¶

Delete an RSS context.

attribute-set:

rss

do:

request

attributes:: [header, context]

rss-delete-ntf ¶

Notification for deletion of an additional RSS context.

attribute-set:

rss

event:

attributes:: [header, context]

mse-get ¶

Get PHY MSE measurement data and capabilities.

attribute-set:

mse

do:

request

attributes:: [header]

reply

attributes:: [header, capabilities, channel-a, channel-b, channel-c, channel-d, worst-channel, link]

dump:

request

attributes:: [header]

reply

attributes:: [header, capabilities, channel-a, channel-b, channel-c, channel-d, worst-channel, link]

Definitions ¶

udp-tunnel-type ¶

enum-name:

None

type:

enum

enum-cnt-name:

__ethtool-udp-tunnel-type-cnt

entries:

vxlan
geneve
vxlan-gpe

stringset ¶

type:: enum
header:: linux/ethtool.h
entries:

header-flags ¶

type:

flags

name-prefix:

ethtool-flag-

doc:

common ethtool header flags

entries:

compact-bitsets:: use compact bitsets in reply
omit-reply:: provide optional reply for SET or ACT requests
stats:: request statistics, if supported by the driver

module-fw-flash-status ¶

type:

enum

doc:

plug-in module firmware flashing status

header:

linux/ethtool.h

entries:

started:: The firmware flashing process has started.
in-progress:: The firmware flashing process is in progress.
completed:: The firmware flashing process was completed successfully.
error:: The firmware flashing process was stopped due to an error.

c33-pse-ext-state ¶

doc:

“groups of PSE extended states functions. IEEE 802.3-2022 33.2.4.4 Variables”

type:

enum

name-prefix:

ethtool-c33-pse-ext-state-

header:

linux/ethtool.h

entries:

none:: none
error-condition:: Group of error_condition states
mr-mps-valid:: Group of mr_mps_valid states
mr-pse-enable:: Group of mr_pse_enable states
option-detect-ted:: Group of option_detect_ted states
option-vport-lim:: Group of option_vport_lim states
ovld-detected:: Group of ovld_detected states
power-not-available:: Group of power_not_available states
short-detected:: Group of short_detected states

phy-upstream-type ¶

enum-name:

phy-upstream

header:

linux/ethtool.h

type:

enum

name-prefix:

phy-upstream

entries:

mac
phy

tcp-data-split ¶

type:

enum

entries:

unknown
disabled
enabled

hwtstamp-source ¶

doc:

Source of the hardware timestamp

enum-name:

hwtstamp-source

name-prefix:

hwtstamp-source-

type:

enum

entries:

netdev:: Hardware timestamp comes from a MAC or a device which has MAC and PHY integrated
phylib:: Hardware timestamp comes from one PHY device of the network topology

pse-event ¶

doc:

PSE event list for the PSE controller

type:

flags

name-prefix:

ethtool-

entries:

pse-event-over-current:: PSE output current is too high
pse-event-over-temp:: PSE in over temperature state
c33-pse-event-detection:: detection process occur on the PSE. IEEE 802.3-2022 33.2.5 and 145.2.6 PSE detection of PDs. IEEE 802.3-202 30.9.1.1.5 aPSEPowerDetectionStatus
c33-pse-event-classification:: classification process occur on the PSE. IEEE 802.3-2022 33.2.6 and 145.2.8 classification of PDs mutual identification. IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification.
c33-pse-event-disconnection:: PD has been disconnected on the PSE. IEEE 802.3-2022 33.3.8 and 145.3.9 PD Maintain Power Signature. IEEE 802.3-2022 33.5.1.2.9 MPS Absent. IEEE 802.3-2022 30.9.1.1.20 aPSEMPSAbsentCounter.
pse-event-over-budget:: PSE turned off due to over budget situation
pse-event-sw-pw-control-error:: PSE faced an error managing the power control from software

input-xfrm ¶

doc:

RSS hash function transformations.

type:

flags

enum-name:

None

name-prefix:

rxh-xfrm-

header:

linux/ethtool.h

entries:

sym-xor:: XOR the corresponding source and destination fields of each specified protocol. Both copies of the XOR’ed fields are fed into the RSS and RXHASH calculation. Note that this XORing reduces the input set entropy and could be exploited to reduce the RSS queue spread.
sym-or-xor:: Similar to SYM_XOR, except that one copy of the XOR’ed fields is replaced by an OR of the same fields.

rxfh-fields ¶

name-prefix:

rxh-

enum-name:

None

header:

linux/ethtool.h

type:

flags

entries:

l2da:
vlan:
l3-proto:
ip-src:
ip-dst:
l4-b-0-1:: src port in case of TCP/UDP/SCTP
l4-b-2-3:: dst port in case of TCP/UDP/SCTP
gtp-teid:
ip6-fl:: IPv6 Flow Label
discard:

Attribute sets ¶

bitset-bits ¶

unspec (`unused`)¶

value:: 0

bit (`nest`)¶

multi-attr:: True
nested-attributes:: bitset-bit

bitset ¶

unspec (`unused`)¶

value:: 0

nomask (`flag`)¶

size (`u32`)¶

bits (`nest`)¶

nested-attributes:: bitset-bits

value (`binary`)¶

mask (`binary`)¶

strings ¶

unspec (`unused`)¶

value:: 0

string (`nest`)¶

multi-attr:: True
nested-attributes:: string

stringset ¶

unspec (`unused`)¶

value:: 0

id (`u32`)¶

count (`u32`)¶

strings (`nest`)¶

multi-attr:: True
nested-attributes:: strings

stringsets ¶

unspec (`unused`)¶

value:: 0

stringset (`nest`)¶

multi-attr:: True
nested-attributes:: stringset

strset ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

stringsets (`nest`)¶

nested-attributes:: stringsets

counts-only (`flag`)¶

privflags ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

flags (`nest`)¶

nested-attributes:: bitset

rings ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

rx-max (`u32`)¶

rx-mini-max (`u32`)¶

rx-jumbo-max (`u32`)¶

tx-max (`u32`)¶

rx (`u32`)¶

rx-mini (`u32`)¶

rx-jumbo (`u32`)¶

tx (`u32`)¶

rx-buf-len (`u32`)¶

tcp-data-split (`u8`)¶

enum:: tcp-data-split

cqe-size (`u32`)¶

tx-push (`u8`)¶

rx-push (`u8`)¶

tx-push-buf-len (`u32`)¶

tx-push-buf-len-max (`u32`)¶

hds-thresh (`u32`)¶

hds-thresh-max (`u32`)¶

mm-stat ¶

MAC Merge (802.3)

unspec (`unused`)¶

value:: 0

pad (`pad`)¶

reassembly-errors (`u64`)¶

doc:: aMACMergeFrameAssErrorCount

smd-errors (`u64`)¶

doc:: aMACMergeFrameSmdErrorCount

reassembly-ok (`u64`)¶

doc:: aMACMergeFrameAssOkCount

rx-frag-count (`u64`)¶

doc:: aMACMergeFragCountRx

tx-frag-count (`u64`)¶

doc:: aMACMergeFragCountTx

hold-count (`u64`)¶

doc:: aMACMergeHoldCount

mm ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

pmac-enabled (`u8`)¶

tx-enabled (`u8`)¶

tx-active (`u8`)¶

tx-min-frag-size (`u32`)¶

rx-min-frag-size (`u32`)¶

verify-enabled (`u8`)¶

verify-status (`u8`)¶

verify-time (`u32`)¶

max-verify-time (`u32`)¶

stats (`nest`)¶

nested-attributes:: mm-stat

linkinfo ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

port (`u8`)¶

phyaddr (`u8`)¶

tp-mdix (`u8`)¶

tp-mdix-ctrl (`u8`)¶

transceiver (`u8`)¶

linkmodes ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

autoneg (`u8`)¶

ours (`nest`)¶

nested-attributes:: bitset

peer (`nest`)¶

nested-attributes:: bitset

speed (`u32`)¶

duplex (`u8`)¶

master-slave-cfg (`u8`)¶

master-slave-state (`u8`)¶

lanes (`u32`)¶

rate-matching (`u8`)¶

linkstate ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

link (`u8`)¶

sqi (`u32`)¶

sqi-max (`u32`)¶

ext-state (`u8`)¶

ext-substate (`u8`)¶

ext-down-cnt (`u32`)¶

debug ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

msgmask (`nest`)¶

nested-attributes:: bitset

wol ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

modes (`nest`)¶

nested-attributes:: bitset

sopass (`binary`)¶

features ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

hw (`nest`)¶

nested-attributes:: bitset

wanted (`nest`)¶

nested-attributes:: bitset

active (`nest`)¶

nested-attributes:: bitset

nochange (`nest`)¶

nested-attributes:: bitset

channels ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

rx-max (`u32`)¶

tx-max (`u32`)¶

other-max (`u32`)¶

combined-max (`u32`)¶

rx-count (`u32`)¶

tx-count (`u32`)¶

other-count (`u32`)¶

combined-count (`u32`)¶

profile ¶

unspec (`unused`)¶

value:: 0

irq-moderation (`nest`)¶

multi-attr:: True
nested-attributes:: irq-moderation

coalesce ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

rx-usecs (`u32`)¶

rx-max-frames (`u32`)¶

rx-usecs-irq (`u32`)¶

rx-max-frames-irq (`u32`)¶

tx-usecs (`u32`)¶

tx-max-frames (`u32`)¶

tx-usecs-irq (`u32`)¶

tx-max-frames-irq (`u32`)¶

stats-block-usecs (`u32`)¶

use-adaptive-rx (`u8`)¶

use-adaptive-tx (`u8`)¶

pkt-rate-low (`u32`)¶

rx-usecs-low (`u32`)¶

rx-max-frames-low (`u32`)¶

tx-usecs-low (`u32`)¶

tx-max-frames-low (`u32`)¶

pkt-rate-high (`u32`)¶

rx-usecs-high (`u32`)¶

rx-max-frames-high (`u32`)¶

tx-usecs-high (`u32`)¶

tx-max-frames-high (`u32`)¶

rate-sample-interval (`u32`)¶

use-cqe-mode-tx (`u8`)¶

use-cqe-mode-rx (`u8`)¶

tx-aggr-max-bytes (`u32`)¶

tx-aggr-max-frames (`u32`)¶

tx-aggr-time-usecs (`u32`)¶

rx-profile (`nest`)¶

nested-attributes:: profile

tx-profile (`nest`)¶

nested-attributes:: profile

rx-cqe-frames (`u32`)¶

rx-cqe-nsecs (`u32`)¶

pause-stat ¶

unspec (`unused`)¶

value:: 0

pad (`pad`)¶

tx-frames (`u64`)¶

rx-frames (`u64`)¶

tx-pause-storm-events (`u64`)¶

doc:: TX pause storm event count. Increments each time device detects that its pause assertion condition has been true for too long for normal operation. As a result, the device has temporarily disabled its own Pause TX function to protect the network from itself. This counter should never increment under normal overload conditions; it indicates catastrophic failure like an OS crash. The rate of incrementing is implementation specific.

pause ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

autoneg (`u8`)¶

rx (`u8`)¶

tx (`u8`)¶

stats (`nest`)¶

nested-attributes:: pause-stat

stats-src (`u32`)¶

eee ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

modes-ours (`nest`)¶

nested-attributes:: bitset

modes-peer (`nest`)¶

nested-attributes:: bitset

active (`u8`)¶

enabled (`u8`)¶

tx-lpi-enabled (`u8`)¶

tx-lpi-timer (`u32`)¶

tsinfo ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

timestamping (`nest`)¶

nested-attributes:: bitset

tx-types (`nest`)¶

nested-attributes:: bitset

rx-filters (`nest`)¶

nested-attributes:: bitset

phc-index (`u32`)¶

stats (`nest`)¶

nested-attributes:: ts-stat

hwtstamp-provider (`nest`)¶

nested-attributes:: ts-hwtstamp-provider

hwtstamp-source (`u32`)¶

enum:: hwtstamp-source

hwtstamp-phyindex (`u32`)¶

cable-result ¶

unspec (`unused`)¶

value:: 0

pair (`u8`)¶

doc:: ETHTOOL_A_CABLE_PAIR

code (`u8`)¶

doc:: ETHTOOL_A_CABLE_RESULT_CODE

src (`u32`)¶

doc:: ETHTOOL_A_CABLE_INF_SRC

cable-nest ¶

unspec (`unused`)¶

value:: 0

result (`nest`)¶

nested-attributes:: cable-result

fault-length (`nest`)¶

nested-attributes:: cable-fault-length

cable-test ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

cable-test-ntf ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

status (`u8`)¶

doc:: _STARTED/_COMPLETE

nest (`nest`)¶

nested-attributes:: cable-nest

cable-test-tdr-ntf ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

status (`u8`)¶

nest (`nest`)¶

nested-attributes:: cable-nest

cable-test-tdr ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

cfg (`nest`)¶

nested-attributes:: cable-test-tdr-cfg

tunnel-udp-entry ¶

unspec (`unused`)¶

value:: 0

port (`u16`)¶

byte-order:: big-endian

type (`u32`)¶

enum:: udp-tunnel-type

tunnel-udp-table ¶

unspec (`unused`)¶

value:: 0

size (`u32`)¶

types (`nest`)¶

nested-attributes:: bitset

entry (`nest`)¶

multi-attr:: True
nested-attributes:: tunnel-udp-entry

tunnel-udp ¶

unspec (`unused`)¶

value:: 0

table (`nest`)¶

nested-attributes:: tunnel-udp-table

tunnel-info ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

udp-ports (`nest`)¶

nested-attributes:: tunnel-udp

fec-hist ¶

pad (`pad`)¶

bin-low (`u32`)¶

doc:: Low bound of FEC bin (inclusive)

bin-high (`u32`)¶

doc:: High bound of FEC bin (inclusive)

bin-val (`uint`)¶

doc:: Error count in the bin (optional if per-lane values exist)

bin-val-per-lane (`binary`)¶

sub-type:: u64
doc:: An array of per-lane error counters in the bin (optional)

fec-stat ¶

unspec (`unused`)¶

value:: 0

pad (`pad`)¶

corrected (`binary`)¶

sub-type:: u64

uncorr (`binary`)¶

sub-type:: u64

corr-bits (`binary`)¶

sub-type:: u64

hist (`nest`)¶

multi-attr:: True
nested-attributes:: fec-hist

fec ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

modes (`nest`)¶

nested-attributes:: bitset

auto (`u8`)¶

active (`u32`)¶

stats (`nest`)¶

nested-attributes:: fec-stat

module-eeprom ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

offset (`u32`)¶

length (`u32`)¶

page (`u8`)¶

bank (`u8`)¶

i2c-address (`u8`)¶

data (`binary`)¶

stats-grp ¶

unspec (`unused`)¶

value:: 0

pad (`pad`)¶

id (`u32`)¶

ss-id (`u32`)¶

stat (`u64`)¶

type-value:: [‘id’]

hist-rx (`nest`)¶

nested-attributes:: stats-grp-hist

hist-tx (`nest`)¶

nested-attributes:: stats-grp-hist

hist-bkt-low (`u32`)¶

hist-bkt-hi (`u32`)¶

hist-val (`u64`)¶

stats ¶

unspec (`unused`)¶

value:: 0

pad (`pad`)¶

header (`nest`)¶

nested-attributes:: header

groups (`nest`)¶

nested-attributes:: bitset

grp (`nest`)¶

nested-attributes:: stats-grp

src (`u32`)¶

phc-vclocks ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

num (`u32`)¶

index (`binary`)¶

sub-type:: s32

module ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

power-mode-policy (`u8`)¶

power-mode (`u8`)¶

pse ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

podl-pse-admin-state (`u32`)¶

name-prefix:: ethtool-a-

podl-pse-admin-control (`u32`)¶

name-prefix:: ethtool-a-

podl-pse-pw-d-status (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-admin-state (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-admin-control (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-pw-d-status (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-pw-class (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-actual-pw (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-ext-state (`u32`)¶

name-prefix:: ethtool-a-
enum:: c33-pse-ext-state

c33-pse-ext-substate (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-avail-pw-limit (`u32`)¶

name-prefix:: ethtool-a-

c33-pse-pw-limit-ranges (`nest`)¶

name-prefix:: ethtool-a-
multi-attr:: True
nested-attributes:: c33-pse-pw-limit

pse-pw-d-id (`u32`)¶

name-prefix:: ethtool-a-

pse-prio-max (`u32`)¶

name-prefix:: ethtool-a-

pse-prio (`u32`)¶

name-prefix:: ethtool-a-

Flow types, corresponding to those defined in the old ethtool header for RXFH and RXNFC as ${PROTO}_FLOW. The values are not matching the old ones to avoid carrying into Netlink the IP_USER_FLOW vs IPV4_FLOW vs IPV4_USER_FLOW confusion.

rss ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

context (`u32`)¶

hfunc (`u32`)¶

indir (`binary`)¶

sub-type:: u32

hkey (`binary`)¶

input-xfrm (`u32`)¶

enum:: input-xfrm

start-context (`u32`)¶

flow-hash (`nest`)¶

nested-attributes:: flow

plca ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

version (`u16`)¶

enabled (`u8`)¶

status (`u8`)¶

node-cnt (`u32`)¶

node-id (`u32`)¶

to-tmr (`u32`)¶

burst-cnt (`u32`)¶

burst-tmr (`u32`)¶

module-fw-flash ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

file-name (`string`)¶

password (`u32`)¶

status (`u32`)¶

enum:: module-fw-flash-status

status-msg (`string`)¶

done (`uint`)¶

total (`uint`)¶

phy ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

index (`u32`)¶

drvname (`string`)¶

name (`string`)¶

upstream-type (`u32`)¶

enum:: phy-upstream-type

upstream-index (`u32`)¶

upstream-sfp-name (`string`)¶

downstream-sfp-name (`string`)¶

tsconfig ¶

unspec (`unused`)¶

value:: 0

header (`nest`)¶

nested-attributes:: header

hwtstamp-provider (`nest`)¶

nested-attributes:: ts-hwtstamp-provider

tx-types (`nest`)¶

nested-attributes:: bitset

rx-filters (`nest`)¶

nested-attributes:: bitset

hwtstamp-flags (`nest`)¶

nested-attributes:: bitset

pse-ntf ¶

header (`nest`)¶

nested-attributes:: header

events (`uint`)¶

enum:: pse-event
doc:: List of events reported by the PSE controller

mse-capabilities ¶

MSE capabilities attribute set

max-average-mse (`uint`)¶

max-peak-mse (`uint`)¶

refresh-rate-ps (`uint`)¶

num-symbols (`uint`)¶

mse-snapshot ¶

MSE snapshot attribute set

average-mse (`uint`)¶

peak-mse (`uint`)¶

worst-peak-mse (`uint`)¶

mse ¶

header (`nest`)¶

nested-attributes:: header

capabilities (`nest`)¶

nested-attributes:: mse-capabilities

channel-a (`nest`)¶

nested-attributes:: mse-snapshot

channel-b (`nest`)¶

nested-attributes:: mse-snapshot

channel-c (`nest`)¶

nested-attributes:: mse-snapshot

channel-d (`nest`)¶

nested-attributes:: mse-snapshot

worst-channel (`nest`)¶

nested-attributes:: mse-snapshot

link (`nest`)¶

nested-attributes:: mse-snapshot

unspec (unused)¶

dev-index (u32)¶

dev-name (string)¶

flags (u32)¶

phy-index (u32)¶

unspec (unused)¶

index (u32)¶

name (string)¶

value (flag)¶

unspec (unused)¶

bit (nest)¶

unspec (unused)¶

nomask (flag)¶

size (u32)¶

bits (nest)¶

value (binary)¶

mask (binary)¶

unspec (unused)¶

index (u32)¶

value (string)¶

unspec (unused)¶

string (nest)¶

unspec (unused)¶

id (u32)¶

count (u32)¶

strings (nest)¶

unspec (unused)¶

stringset (nest)¶

unspec (unused)¶

header (nest)¶

stringsets (nest)¶

counts-only (flag)¶

unspec (unused)¶

header (nest)¶

flags (nest)¶

unspec (unused)¶

header (nest)¶

rx-max (u32)¶

rx-mini-max (u32)¶

rx-jumbo-max (u32)¶

tx-max (u32)¶

rx (u32)¶

rx-mini (u32)¶

rx-jumbo (u32)¶

unspec (`unused`)¶

dev-index (`u32`)¶

dev-name (`string`)¶

flags (`u32`)¶

phy-index (`u32`)¶

unspec (`unused`)¶

index (`u32`)¶

name (`string`)¶

value (`flag`)¶

unspec (`unused`)¶

bit (`nest`)¶

unspec (`unused`)¶

nomask (`flag`)¶

size (`u32`)¶

bits (`nest`)¶

value (`binary`)¶

mask (`binary`)¶

unspec (`unused`)¶

index (`u32`)¶

value (`string`)¶

unspec (`unused`)¶

string (`nest`)¶

unspec (`unused`)¶

id (`u32`)¶

count (`u32`)¶

strings (`nest`)¶

unspec (`unused`)¶

stringset (`nest`)¶

unspec (`unused`)¶

header (`nest`)¶

stringsets (`nest`)¶

counts-only (`flag`)¶

unspec (`unused`)¶

header (`nest`)¶

flags (`nest`)¶

unspec (`unused`)¶

header (`nest`)¶

rx-max (`u32`)¶

rx-mini-max (`u32`)¶

rx-jumbo-max (`u32`)¶

tx-max (`u32`)¶

rx (`u32`)¶

rx-mini (`u32`)¶

rx-jumbo (`u32`)¶