Support for Salus SP600 Smart Plug

[GadgetUK]

This appears as a light switch, but no metering functionality is available.

Details of the device can be found here

https://salus-controls.com/uk/product/sp600/#description

Happy to provide more info if instructions on how to get required data are available.

[ebaauw]

See https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support

[GadgetUK]

Ok, think this the right stuff

[ebaauw]

Could you try and read the attributes for the Basic cluster? We need the Model identifier and, preferably, the Manufacturer name.

Could you also please post a screenshot of the Simple metering and Temperature measurement clusters, again, after reading the attributes? The metering might provide life-time consumption and current power, but the scale typically differs per device type. I haven’t seen a plug before, that reports temperature, but if it’s functional, we could support it.

It would be good to know if the plug supports attribute reporting, but we haven’t yet described how to determine that in the Wiki. I’ll see if I can find some for that time this weekend.

[GadgetUK]

Ok. Here goes.

[GadgetUK]

If I've followed the deconz manual correctly....

[ebaauw]

Thanks.

When you connect something to the plug and turn it on, does the value for Instantaneous demand change? Current Summation Delivered typically takes a while - it's usually updates every 10Wh or so. You want to try setting the reporting config to Min: 1, Max: 300, Change: 1 and create a binding from that cluster to the RaspBee. Select the Bind Dropbox from the Panels menu, drag the 0x702 cluster to Source and drag the 0x01 endpoint on the coordinator to Destination and press Bind:

Could you try the same for the OnOff attribute and the OnOff cluster?

The temperature cluster seems to measure internal temperature (49°C), so that doesn't seem too useful.

[GadgetUK]

Ok. Writing changed values to the reporting configuration fails.

[ebaauw]

Does it come back quickly with an error message, or does it take a longer time? Sometimes the GUI doesn’t seems to miss the ack. What happens if you close the popup window, re-open it and read the config?

[GadgetUK]

Ok, seems to have worked

Although the reportable change is now greyed out.

[ebaauw]

The GUI doesn’t handle the int24 well.

[GadgetUK]

Is there anything more that I can do to progress support ?

[GadgetUK]

Feel like this has stalled.

[Smanar]

Lol, I haven't the device so I can't make test but the GUI can handle int24 now ? So you can configure reporting now ?
I had similar problem on another device, and the GUI was corrected (was dat16 for me)

[GadgetUK]

Ok, still seems that it's not possible to set the reporting configuration (specifically the reportable change)

You can however see that it does correctly report the power usage (in this case a heater)

Half Power

Full Power