[oxagast]

I've created this pull for a change in documentation to reflect that SKE (specifically the SK600, maybe others) devices will work with the nutdrv_qx driver.

Note:
Seems to work with this configuration in /etc/nut/ups.conf:

[SK600]
        driver = "nutdrv_qx"
        port = "auto"
        vendorid = "0001"
        productid = "0000"
        bus = "003"

[jimklimov]

Thanks, can you also add an entry with device model into data/ drivers.list.in please?

…

On Sun, Jun 19, 2022, 14:41 Marshall Whittaker ***@***.***> wrote: I've created this pull for a change in documentation to reflect that SKE (specifically the SK600, maybe others) devices will work with the nutdrv_qx driver. Note: Seems to work with this configuration in /etc/nut/ups.conf: [SK600] driver = "nutdrv_qx" port = "auto" vendorid = "0001" productid = "0000" bus = "003" ------------------------------ You can view, comment on, or merge this pull request online at: #1451 Commit Summary - aa9bf3d <aa9bf3d> Noted that SKE devices work with the nutdrv_qx driver. File Changes (1 file <https://github.com/networkupstools/nut/pull/1451/files>) - *M* docs/man/nutdrv_qx.txt <https://github.com/networkupstools/nut/pull/1451/files#diff-105b10e001f449493f13b9c40bc9f0e05faef0dd352b369cd897567b0382c709> (2) Patch Links: - https://github.com/networkupstools/nut/pull/1451.patch - https://github.com/networkupstools/nut/pull/1451.diff — Reply to this email directly, view it on GitHub <#1451>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAMPTFFMC7AGY57YIGFYIF3VP4IRLANCNFSM5ZGKO5KQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[jimklimov]

Also seems the docs/nut.dict should be updated.

[oxagast]

Requested changes have been made to data/drivers.list.in as well as docs/nut.dict.

[Hoover49]

nutdrv_qx driver does not work with a SK1500 UPS. I receive the following:

Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic Q* USB/Serial driver 0.28 (2.7.4)
USB communication driver 0.33
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these options
(man 8 nutdrv_qx).

[jimklimov]

@Hoover49 : a bit too little to go on: did you specify the (bogus) vendorid/productid values like in the sample above?

Did you try with "an up-to-date version of NUT" (2.7.4 is now 7.5 years old... although for that matter, the original post did not clarify if it was on 2.8.0+, either)?

Can you try starting the driver with higher debug verbosity to check what it disliked? e.g.

nutdrv_qx -a myupsname -DDDDDD -d1

[Hoover49]

I upgraded to version 2.8 and now everything appears to be working. Thanks for your advice.