(a) 
The International Plumbing Code, 2015 edition, as published by the International Code Council and as amended is hereby adopted as the plumbing code for all nonresidential construction and buildings in the city, all installations, including alterations, repairs and replacement of plumbing piping, fittings, fixtures, equipment and appurtenances, which may be connected to the city water or sewerage system shall be regulated in accordance with said International Plumbing Code (2015) on file in the office of the city secretary are hereby adopted as if fully set out in this section, with the additions, insertions, deletions and changes prescribed in Section 3.702.
(b) 
Plumbing regulations and requirements within the International Residential Code constitute the plumbing code for residential construction.
(Ordinance 03132017, sec. 2, adopted 3/13/17)
The following sections of the code adopted in Section 3.701 are hereby revised.
Section P101.1. Insert: City of Prairie View.
Section P108.4. Amended to read as follows:
Any person, firm, or corporation violating the terms of the plumbing code shall be guilty of a misdemeanor and punished by a fine up to $2,000.00. Each day that any violations of, or failure to comply with, this article is committed or permitted to continue shall constitute a separate and distinct offense under this section.
Section P108.5. Last sentence is amended to read as follows:
Any person who shall continue any work in or about the structure after having been served with a stop-work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be liable to a fine of not more than two thousand dollars ($2,000.00).
Section P305.6.1. Insert: six inches (6").
Section P305.6.1. Insert: eighteen inches (18").
Section P903.1. Insert: six inches (6").
(Ordinance 03132017, sec. 2, adopted 3/13/17)