
QTT 1 [Tianji Research Institute]
QTT 1 (Quantutong 1) is a navigation communication integration test satellite developed by developed by Tianji Research Institute.
QTT-1 is the first technical verification satellite for the "future constellation programme" which is customized and developed by Tianyi Research Institute for Beijing-based Quan Tu Tong Co (Full Map Network Co. Ltd.) The satellite is based on the 6U CubeSat satellite platform of Spacety Aerospace Co. It carries navigation, communication, imaging, AIS-receiver, and amateur radio payloads.
QTT-1 was launched on the third CZ-11 flight in early 2018.
| Nation: | China |
|---|---|
| Type / Application: | Technology |
| Operator: | Tianji Research Institute |
| Contractors: | Tianji Research Institute, Spacety Aerospace Co. (bus) |
| Equipment: | navigation, communication, imaging, AIS-receiver, and amateur radio payloads |
| Configuration: | CubeSat (6U) ? |
| Propulsion: | None |
| Power: | Solar cells, batteries |
| Lifetime: | |
| Mass: | |
| Orbit: |
| Satellite | COSPAR | Date | LS | Launch Vehicle | Remarks | |
|---|---|---|---|---|---|---|
| TY 6 (QTT, Tianyi 6, XX 6, Xiaoxiang 6) | 2018-008C | 19.01.2018 | Jq LP-43/95B | CZ-11 | with Jilin-1 Shipin-07, Jilin-1 Shipin-08, TY 2, KIPP, Zhou Enlai |
